Onkyo HT-SR800 instruction manual Advanced Setup, Crossover Frequency

HT-SR800_En.book Page 57 Thursday, January 25, 2007 10:28 AM

Advanced Setup—Continued

7	Use the Down [	] button to
	select “Surr Back,” and use the
	Left and Right [	]/[ ] buttons to
	select Small, Large, or None.

Small: Select if the surround back speakers are small.

Large: Select if the surround back

speakers are large.

None: Select if no surround back speakers are connected.

Notes:

•If the Surround setting in step 6 is set to None, this setting does not appear.

•If the Surround setting in step 6 is set to Small, the Large option cannot be selected.

8	Use the Down [ ] button to
	select “Surr Back Ch,” and use

the Left and Right []/[ ] but- tons to select 2ch or 1ch.

2ch: Select if two (left and right) surround back speakers are connected.

1ch: Select if one surround back

speaker is connected.

Note:

•If the Surround and Surr Back set- tings in steps 6 and 7 are set to None, this setting does not appear.

Continue with step 9 of the “Crossover

Frequency” setting.

Note:

•These settings cannot be changed while headphones are connected, speaker set B is on, or the multichannel DVD input is being used.

Crossover Frequency

This setting is set automatically by the Automatic Speaker Setup function (see page 37).

This setting only applies to the speakers that you speci- fied as Small in the “Speaker Configuration” on page 56. To get the best bass performance from your speaker sys- tem, you need to set the crossover frequency according to the size and frequency response of your speakers

9	Use the Down [	] button to
	select “Crossover,” and then use
	the Left and Right [ ]/[ ] but-
	tons to select a crossover fre-
	quency.
	Use the diameter of the smallest
	speaker in your system when choosing
	the crossover frequency.
	Speaker cone	Crossover
	diameter	frequency
	Over 8 in.	40/50/60Hz*
	(20 cm)
	6-1/2 to 8 in.	80Hz
	(16–20 cm)
	5-1/4 to 6-1/2 in.	100Hz (default)
	(13–16 cm)
	3-1/2 to 5-1/4 in.	120Hz
	(9–13 cm)
	Under 3-1/2 in.	150/200Hz*
	(9 cm)
	*Choose the setting suitable for the speaker.

Continue with step 10 of the “Double

Bass” setting on the next page.

Notes:

•For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly.

•Choose a higher crossover frequency if you want more sound from your subwoofer.

•These settings cannot be changed while headphones are connected, speaker set B is on, or the multichannel DVD input is being used.

57