Onkyo HT-SR800 instruction manual Double Bass, Speaker Distance

HT-SR800_En.book Page 58 Thursday, January 25, 2007 10:28 AM

Advanced Setup—Continued

Double Bass

This setting is not set automatically by the Automatic Speaker Setup function (see page 37).

With the Double Bass function, you can boost bass out- put by feeding bass sounds from the front left and right channels to the subwoofer. This function can be set only if the Subwoofer setting (step 3) is set to Yes, and the Front setting (step 4) is set to Large in the Speaker Con- figuration on page 56.

10	Use the Down [ ] button to
	select “Double Bass,” and then

use the Left and Right []/[ ] buttons to select:

On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default).

Off: Double Bass function off.

11	Press the [SETUP] button.
	Setup closes.

SETUP

Note:

•These settings cannot be changed while headphones are connected, speaker set B is on, or the multichannel DVD input is being used.

Speaker Distance

These settings are set automatically by the Automatic Speaker Setup function (see page 37).

With these settings, you can specify the distance from each speaker to the listening position.

1		Measure and make a note of the
		distance from each speaker to
		the listening position.
2		Press the [RECEIVER] REMOTE
	RECEIVER	MODE button, followed by the
		[SETUP] button.
	SETUP
3		Use the Up and Down [ ]/[ ]
		buttons to select “Sp Distance,”

and then press [ENTER].

4	While “Unit” is displayed, use the
	Left and Right [ ]/[ ] buttons to
	select “feet” or “meters”.

feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

5	Use the Down [	] button to
	select “Front,” and use the Left
	and Right [ ]/[	] buttons to

specify the distance for the front speakers, then press the Down [ ] button to select the next speaker.

6	Repeat step 5 for all speakers.
	Note:
	Speakers that you set to No or None in
	the Speaker Configuration (page 56)
	cannot be selected.

58