Recording
This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.
Recording the Input Source
You can only record to a component that’s connected to the TAPE OUT or VCR/DVR OUT jacks.
See pages
Recording Audio and Video from Separate Sources
You can overdub audio onto your video recordings by simultaneously recording audio and video from two sep- arate sources. This is possible because only the audio source is switched when an
In the following example, audio from the CD player con- nected to the CD IN jacks, and video from the camcorder
1
DVD VCR/DVR CBL/SAT
AUX TAPE TUNER
C D
Remote
controller
1 2
VCR/DVR CBL/SAT
46
AUXDVD
7 8 9
Use the input selector buttons to select the component that you want to record.
Audio signals from the selected input source are output by the TAPE OUT and VCR/DVR OUT jacks.
You can listen to the source while recording. The AV receiver’s VOL- UME control has no effect on record- ing.
connected to the AUX INPUT VIDEO jack are recorded by the VCR connected to the VCR/DVR OUT jacks.
AUX INPUT
VIDEO | L AUDIO R |
|
| Camcorder |
| |
|
| video signal |
| |
|
| audio signal |
| |
|
| HDMI | SIRIUS | XM |
|
| ANTENNA |
| |
IN 2 | IN 1 | OUT ASSIGNABLE |
| |
DIGITAL IN |
| AM | FM 75 | L |
|
|
| ||
ASSIGNABLE |
|
|
|
|
TAPE TUNER 
CD
2 | On your recorder, start record- |
| |
| ing. |
|
|
3 | Start playback on the source |
| |
| component. |
|
|
COAX- |
|
|
|
|
|
|
|
|
|
IAL1 |
|
|
| Y |
|
|
|
|
|
(DVD) |
|
|
|
|
|
|
|
| MONITOR |
|
|
|
|
| CBL/SAT | VCR/DVR | DVD | OUT V | |
2 |
|
|
| CB/PB | V |
|
|
| R |
(CBL/SAT) |
|
|
|
|
|
|
|
| |
OPTICAL |
|
|
|
|
|
|
|
| S |
1 |
|
|
| CR/PR | S |
|
|
|
|
(VCR/DVR) |
|
|
|
|
|
|
|
| SURROUND B |
|
|
|
|
|
|
|
|
| |
CBL/SAT IN | VCR/DVR IN | DVD IN | OUT |
| IN | OUT | IN | IN | SPEAKER |
COMPONENT VIDEO |
|
|
|
|
|
|
| ||
2 | IN | OUT | IN |
| IN | OUT | IN | FRONT | SURROUND CENTER SURR BAC |
(CD) |
| ||||||||
L |
|
|
| L | L |
|
|
|
|
R |
|
| R | R |
|
|
|
| |
REMOTE |
|
|
|
|
|
|
|
| SUB |
CONTROL | CD | TAPE |
|
| CBL/SAT | VCR/DVR |
| WOOFER | |
|
|
|
| DVD | |||||
Notes:
•You cannot record from a component that’s connected to a digital input. Only analog inputs can be recorded.
•The surround sound effects provided by the listening modes cannot be recorded.
•You cannot record from a component that’s connected to the multichannel DVD input.
•If you select another input source while recording, that input source will be recorded instead.
•While the Pure Audio listening mode is selected, the VCR/DVR OUT V and S jacks don’t output video sig- nals, so select another mode when recording.
CD player | VCR |
1.Prepare the camcorder and CD player for playback.
2.Prepare the VCR for recording.
3.Press the [AUX] input selector button.
4.Press the [CD] input selector button.
This selects the CD player as the audio source, but leaves the camcorder as the video source.
5.Start recording on the VCR, then start playback on the camcorder and CD player.
Video from the camcorder and audio from the CD player are recorded by the VCR.
55