TANDBERG D12817-05 user manual System configuration, Menu

Page 15

TANDBERG Videoconferencing System	Installation

System configuration

•Switch the system on by activating the power switch on the system.

•After the system has performed a self-test routine, product logo and a ‘Welcome’ menu will be displayed on the monitor.

NOTE

THESE SETTINGS ARE ESSENTIAL FOR OPTIMAL SYSTEM SET-UP.

•Enabled but unused ISDN lines (lines not active) should be disabled. Select the Quick Key ‘System Info’ (on the remote control) to view line status.

menu

PRESS MENU ON THE REMOTE CONTROL. SELECT THE MENU ‘TERMINAL SETTINGS’, ‘ISDN SETTINGS’. SELECT THE RELEVANT ‘LINE SETUP’ MENU AND SET ‘ENABLED: OFF’.

•Enter System Name to identify the system during an MCU conference. Select ‘Utilities’, ‘System Name’ and enter the name using the number keys (as on a mobile phone).

•Select the language you want to use in ‘Terminal Settings’, ‘Language’.

•To activate a software option, enter an option key (see paperwork accompanying your system), see

‘Terminal Settings’, ‘Software Options’.

• Press CONNECT on the remote control. A dial tone should be heard if the network is active.

connect • Using the monitor remote control, adjust the volume on the monitor to a level of your choice. This volume will be the default volume for all calls.

15

Image 15

Contents Page Tandberg Videoconferencing System Trademarks and copyright Environmental IssuesOperator Safety Summary Contents Advanced use Peripheral EquipmentAppendices Index TIP IntroductionLAN Menu structureAt a glance the Tandberg 550 system Tandberg 550 Videoconferencing SystemTable microphone Remote controlCamera CodecInstallation PrecautionsUnpacking Connecting cables Microphone cable Monitor cables 5a. LAN cable Power cable5b. Wireless LAN Insert PC Card Isdn cablesSelect Audio/Video input on monitor Power onMenu System configurationLAN configuration Isdn configurationGetting started System start-upWelcome menu Basics Making a call Making and ending callsTIP Selecting / setting default quality bandwidth Selecting / setting default network Answer a call End a callCorrecting keying mistakes Directory Add New Entry Edit EntryDelete Entry View outgoing video selfview Adjusting volumeDo Not Disturb / Sleep Mode General useOn Screen Symbols Moving / zooming camera Focusing cameraControlling the Main Camera Selecting video sourcesVoice Activated Camera Positioning Presets Selecting presetsStoring presets Far end camera control Fecc Receiving a snapshot Sending and receiving snapshotsSending a snapshot Viewing a snapshotExternal MCU control functions Quick Menu Page Text Chat / Closed Captioning Web-interfaceSnapshots PC SoftPresenterOther PC applications StreamingMenu Password Advanced useMain menu Video VGA ResolutionsCall quality AudioUtilities AutoanswerFar end camera control Camera Brightness Welcome MenuMCU status line System NameAuto Request Floor Web SnapshotsISDN-BRI Settings Terminal SettingsSpids This Service has Limited Access on Some Isdn Networks Parallel dial LAN Settings Page Settings Page Rsvp Advanced H.323 SettingsDiffserv IP Type of Service TOSQoS Type IP PrecedenceIP Settings Page Wireless LAN Settings Increased Encryption Level will Decrease Performance Snmp Settings Audio Settings AudioIn ModeVideo Call Alert Tone / Alert Volume Echo Control Key TonesVGA Settings VNC Settings Fallback to telephony Call SettingsAccess Code Incoming telephone callsEncryption Secure Conference Encryption ModeNetwork Profiles Max Call LengthPage Dataport configuration Software Options LanguageDiagnostics System infoChannel status TIP Restore defaults Call statusIP Address Conflict Check Test subsystem View current settingsInterfaces Peripheral EquipmentPage Tracker Document cameraAppendix 1 Security AppendicesAppendices Tandberg Videoconferencing System Optional feature Appendix 2 Using the file system Custom logos · Go to the folder where your logo is located Appendix 3 Declaration of Conformity Index Index Tandberg Videoconferencing System