TANDBERG D12817-05 user manual Welcome Menu, MCU status line, System Name, Camera Brightness

Page 41

TANDBERG Videoconferencing System

Advanced use

Welcome Menu

On: A ‘Welcome menu’ with useful information on how to use the system will be displayed. See ‘Getting started’ section.

Off: The Welcome menu’ will not be displayed.

Logo: If a logo is uploaded to the system, it will be shown when this button is selected.

MCU status line

On: The MCU indicators will be displayed and provide information about the conference.

Off: The MCU indicators will not be displayed.

Auto: The MCU indicators will be displayed for a few seconds and then timed out. When grabbing the remote control, the indicators will be shown again.

System Name

Identifies the system:

•during an MCU conference call.

•when using the Web-interface.

•when the codec is acting as an SNMP Agent.

•towards a DHCP server.

•as an H323 ID.

Menu Password

Enter the code whch should be entered to get access to the menus on the TANDBERG system. When pressing the ‘Menu’ button on the remote control, the user will be asked to enter the Password written here.

Camera Brightness

To manually adjust the brightness select ‘Manual’ and use the arrow keys to adjust.

41

Image 41

Contents Page Tandberg Videoconferencing System Trademarks and copyright Environmental IssuesOperator Safety Summary Contents Appendices Index Advanced usePeripheral Equipment TIP IntroductionLAN Menu structureAt a glance the Tandberg 550 system Tandberg 550 Videoconferencing SystemCamera Remote controlCodec Table microphoneUnpacking InstallationPrecautions Monitor cables Connecting cablesMicrophone cable 5b. Wireless LAN Insert PC Card Power cableIsdn cables 5a. LAN cableSelect Audio/Video input on monitor Power onMenu System configurationLAN configuration Isdn configurationWelcome menu Getting startedSystem start-up Basics Making a call Making and ending callsTIP Selecting / setting default quality bandwidth Selecting / setting default network Correcting keying mistakes Answer a callEnd a call Directory Delete Entry Add New EntryEdit Entry Do Not Disturb / Sleep Mode Adjusting volumeGeneral use View outgoing video selfviewOn Screen Symbols Controlling the Main Camera Focusing cameraSelecting video sources Moving / zooming cameraVoice Activated Camera Positioning Storing presets PresetsSelecting presets Far end camera control Fecc Sending a snapshot Sending and receiving snapshotsViewing a snapshot Receiving a snapshotExternal MCU control functions Quick Menu Page Text Chat / Closed Captioning Web-interfaceOther PC applications PC SoftPresenterStreaming SnapshotsMain menu Menu PasswordAdvanced use Call quality VGA ResolutionsAudio VideoFar end camera control UtilitiesAutoanswer MCU status line Welcome MenuSystem Name Camera BrightnessAuto Request Floor Web SnapshotsISDN-BRI Settings Terminal SettingsSpids This Service has Limited Access on Some Isdn Networks Parallel dial LAN Settings Page Settings Page Rsvp Advanced H.323 SettingsQoS Type IP Type of Service TOSIP Precedence DiffservIP Settings Page Wireless LAN Settings Increased Encryption Level will Decrease Performance Snmp Settings Video Call Alert Tone / Alert Volume Audio SettingsAudioIn Mode Echo Control Key TonesVGA Settings VNC Settings Access Code Call SettingsIncoming telephone calls Fallback to telephonyEncryption Secure Conference Encryption ModeNetwork Profiles Max Call LengthPage Dataport configuration Software Options LanguageChannel status DiagnosticsSystem info TIP IP Address Conflict Check Restore defaultsCall status Test subsystem View current settingsInterfaces Peripheral EquipmentPage Tracker Document cameraAppendix 1 Security AppendicesAppendices Tandberg Videoconferencing System Optional feature Appendix 2 Using the file system Custom logos · Go to the folder where your logo is located Appendix 3 Declaration of Conformity Index Index Tandberg Videoconferencing System