TANDBERG D12817-05 user manual IP Settings

Page 53

TANDBERG Videoconferencing System

Advanced use

IP Settings

NOTE

CHANGES IN THIS MENU WILL NOT HAVE

ANY EFFECT BEFORE THE SYSTEM IS RESTARTED.

IP-assignment

DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.

DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by the DHCP server.

Static: The codec’s IP-address and IP-subnet mask must be specified in the IP-address field.

IP-address

IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode, the assigned IP-address can be found on the Welcome Menu.

IP-subnet mask

IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN-administrator will provide the correct value for this field.

Gateway

When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP address, subnet mask, and default gateway must be specified by the LAN administrator.

53

Image 53

Contents Page Tandberg Videoconferencing System Trademarks and copyright Environmental IssuesOperator Safety Summary Contents Appendices Index Advanced usePeripheral Equipment TIP IntroductionLAN Menu structureAt a glance the Tandberg 550 system Tandberg 550 Videoconferencing SystemCamera Remote controlCodec Table microphoneUnpacking InstallationPrecautions Monitor cables Connecting cablesMicrophone cable 5b. Wireless LAN Insert PC Card Power cableIsdn cables 5a. LAN cableSelect Audio/Video input on monitor Power onMenu System configurationLAN configuration Isdn configurationWelcome menu Getting startedSystem start-up Basics Making a call Making and ending callsTIP Selecting / setting default quality bandwidth Selecting / setting default network Correcting keying mistakes Answer a callEnd a call Directory Delete Entry Add New EntryEdit Entry Do Not Disturb / Sleep Mode Adjusting volumeGeneral use View outgoing video selfviewOn Screen Symbols Controlling the Main Camera Focusing cameraSelecting video sources Moving / zooming cameraVoice Activated Camera Positioning Storing presets PresetsSelecting presets Far end camera control Fecc Sending a snapshot Sending and receiving snapshotsViewing a snapshot Receiving a snapshotExternal MCU control functions Quick Menu Page Text Chat / Closed Captioning Web-interfaceOther PC applications PC SoftPresenterStreaming SnapshotsMain menu Menu PasswordAdvanced use Call quality VGA ResolutionsAudio VideoFar end camera control UtilitiesAutoanswer MCU status line Welcome MenuSystem Name Camera BrightnessAuto Request Floor Web SnapshotsISDN-BRI Settings Terminal SettingsSpids This Service has Limited Access on Some Isdn Networks Parallel dial LAN Settings Page Settings Page Rsvp Advanced H.323 SettingsQoS Type IP Type of Service TOSIP Precedence DiffservIP Settings Page Wireless LAN Settings Increased Encryption Level will Decrease Performance Snmp Settings Video Call Alert Tone / Alert Volume Audio SettingsAudioIn Mode Echo Control Key TonesVGA Settings VNC Settings Access Code Call SettingsIncoming telephone calls Fallback to telephonyEncryption Secure Conference Encryption ModeNetwork Profiles Max Call LengthPage Dataport configuration Software Options LanguageChannel status DiagnosticsSystem info TIP IP Address Conflict Check Restore defaultsCall status Test subsystem View current settingsInterfaces Peripheral EquipmentPage Tracker Document cameraAppendix 1 Security AppendicesAppendices Tandberg Videoconferencing System Optional feature Appendix 2 Using the file system Custom logos · Go to the folder where your logo is located Appendix 3 Declaration of Conformity Index Index Tandberg Videoconferencing System