www.ti.com |
B.17 MSP-TS430RGC64USB
Due to the use of diodes in the power chain, the voltage on the MSP430F5xx device is approximately
0.3V lower than is set by the debugging tool. Set the voltage in the IDE to 0.3 V higher than desired; for example, to run the MCU at 3.0 V, set it to 3.3 V.
Figure B-33. MSP-TS430RGC64USB Target Socket Module, Schematic
82 | Hardware | SLAU278F |
|
| Submit Documentation Feedback |
©