Onkyo TX-SR574 instruction manual Advanced Setup, Speaker Distance, Speaker Levels

Page 51

Advanced Setup—Continued

Speaker Distance

With these settings, you can specify the distance from each speaker to the listening position.

1

 

Measure and make a note of the

 

 

 

 

distance from each speaker to

 

 

the listening position.

2

 

Press the [RECEIVER] REMOTE

RECEIVER

MODE button, followed by the

 

 

 

 

[SETUP] button.

 

SETUP

 

3

 

Use the Up and Down [ ]/[ ]

 

 

buttons to select “3. SP Dis-

tance,” and then press [ENTER].

example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, and Surr Back L distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

Speaker Levels

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.

The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver is muted.

4

While “Unit” is displayed, use the

 

 

Left and Right [ ]/[ ] buttons to

 

select “feet” or “meters”.

feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

5

Use the Down [

] button to

 

select “Front,” and use the Left

 

and Right [ ]/[

] buttons to

specify the distance for the front speakers, then press the Down [ ] button to select the next speaker.

6

Repeat step 5 for all speakers.

 

 

Note:

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 35)

 

cannot be selected.

 

 

7

Press the [SETUP] button.

 

 

Setup closes.

 

 

Notes:

The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For

1

 

Press the [RECEIVER] REMOTE

RECEIVER

MODE button, followed by the

 

 

 

 

[SETUP] button.

 

SETUP

 

2

 

Use the Up and Down [ ]/[ ]

buttons to select “4. Level Cal,” and then press [ENTER].

A pink noise test tone is output by the front left speaker.

3

Turn up the volume so that you

 

 

can hear the test tone suffi-

 

ciently.

 

As each speaker outputs the test tone,

 

its name appears on the display.

 

 

 

 

 

 

 

 

 

 

 

 

51

Image 51
Contents TX-SR574 Avis Important Safety InstructionsFCC Information for User PrecautionsPower For models having a power cord with a polarized plugSpeaker cable labels Supplied AccessoriesPrecautions Make sure you have the following accessoriesFeatures Speaker Set B Sub Room Enjoying Home TheaterSpeaker Sets a and B Speaker Set a Main RoomContents Front Panel Getting to Know the AV ReceiverDisplay Getting to Know the AV ReceiverVideo 1 IN/OUT and Video 2 Rear PanelDigital in Optical 1, 2, 3, and Coaxial Front Speakers A, Surround SPEAKERS, Center SPEAKER,Remote Controller Installing the BatteriesAiming the Remote Controller Remote Controller Using the Remote ControllerRECEIVER/TAPE Mode ON/STANDBY button Listening Mode buttonsRemote Mode buttons Buttons used when the Tuner input is selectedDVD Mode Arrow / and Enter buttons CD/MD/CDR/HDD ModeTo select the input source, press DISC/ALBUM +/- buttonSpeaker Configuration Connecting Your SpeakersSpeaker Connection Precautions Read the following before connecting your speakersConnecting Your Speakers Connecting Speaker Set a Connecting Speaker Set BConnecting a Powered Subwoofer Attach the FM antenna, as shown American Model Connecting AntennasConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting AntennasConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksVideo Connection Formats Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Which Connections Should I Use?Hint Connecting a TV or ProjectorVideo Connection Audio ConnectionAntenna Connecting a DVD playerDVD player Hooking Up the Multichannel DVD InputConnecting a VCR or DVD Recorder for Playback VCRDVD recorder Camcorder or console Connecting a VCR or DVD Recorder for RecordingConnecting a Camcorder, Games Console, or Other Device Make the video connection a Make the audio connection aSatellite, cable, set-top box, etc Phono preamp StepReceiver’s Video 2 in L/R jacks and Video 2 in S Jacks Connecting an HDD-compatible ComponentCassette recorder, CDR, etc Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting the Power Cord of Another Component SeeRemote Control Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbyHave you connected a component to a digital audio input? Turning On the AV ReceiverTurning On and Standby Smooth Operation in a Few Easy StepsFirst Time Setup Assigning Digital Inputs to Input SourcesChanging the Input Display First Time Setup Minimum Speaker Impedance Setup not North American modelComponent Video Setup Setup closes Press the Setup buttonLeft and Right / but- tons to select Small, Large, or None Testing the SpeakersPress the remote controller’s Test Tone but- ton Use the Down button toStart playback on the source component Select a suitable listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationUsing the Multichannel DVD Input Playing Your AV ComponentsDisplaying Source Information Tuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM stations Listening to the Radio Presetting Radio StationsMuting the AV Receiver Adjusting the Bass and TrebleSetting the Display Brightness Common FunctionsCommon Functions Using the Sleep TimerAdjusting Speaker Levels Using HeadphonesSelecting on the AV Receiver Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesPCM*1 Using the Listening ModesDTS About the Listening ModesOnkyo Original DSP Modes Use this mode with any stereo movie e.g., TV, DVD, VHSUsing the Late Night Function Dolby Digital only Using the CinemaFILTERUsing the Audio Adjust Settings Dolby Digital EX Input Signal Setting Input Channel SettingsPlii and PLIIx Music Mode Settings DTS Neo6 Music Mode SettingRecording Recording the Input SourceRecording Audio and Video from Separate Sources Double Bass Advanced SetupAdvanced Speaker Settings Crossover FrequencyAdvanced Setup Speaker DistanceSpeaker Levels Digital Input Signal Formats Mode button Correcting Sound and Picture SyncInput Selector Controlling Other Components Entering Remote Control CodesControlling Other Components Remote Control Codes for Onkyo Components Connected viaResetting Remote Mode Buttons Resetting the Remote ControllerON/STANDBY, TV TV VOLCH + Troubleshooting Troubleshooting Can’t record Remote controller doesn’t workSound changes when I connect my head- phones Can’t control other componentsVideo ATT2 Gain is reduced by 2 dB Video ATT0 defaultMemory Backup Video AttenuationTuner Section SpecificationsAmplifier Section Video SectionPage Page Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe UK Office