Runco CW-50MC manual Menus for PC/HDTV-I D-SUB Input

MENUS for PC/HDTV-I D-SUB INPUT

OSD Menus for PC/HDTV-I D-Sub Input

These menus will appear only when displayed for computer.

CINEMAWALL				INPUT 1	1.	PICTURE Tab
PICTURE	SCREEN		SET UP	OPTION		The Picture menu lists adjustments for computer
CONTRAST		: 0				input to the plasma:
BRIGHTNESS		: 0
R. ADJUST		: 0				• CONTRAST is used to set the white level.
G. ADJUST		: 0
B. ADJUST		: 0				• BRIGHTNESS is used to set the black level.
H. SHARPEN		: 0				• R., G., B. ADJUST can be adjusted to set color
V. SHARPEN		: 0				balance.
FACTORY						• H. and V. SHARPEN option allows for adjustment
						to improve the detail in the horizontal and vertical
						direction independently.
						• FACTORY set the back to the default settings.
CINEMAWALL				INPUT1	2.	SCREEN Tab
PICTURE	SCREEN		SET UP	OPTION		• POSITION option allows for position shift of the
POSITION		:	0/ 0			image.
FREQ. ADJ.		:	0			• FREQ. ADJ. adjusts the frequency to adjust for the
PHASE ADJ.		:	0
						plasma.
DISPLAY RESET						• PHASE ADJ. adjusts the image of the picture to
						match the screen.
						• DISPLAY RESET defaults to the factory settings for
						the current input Only.

CINEMAWALL			INPUT1
PICTURE	SCREEN	SET UP	OPTION
	POWER MANAGEMENT		: OFF
	CLAMP POSITION		: MIDDLE
	SIGNAL		: XGA

3.SET UP Tab

•POWER MANAGEMENT shuts-down the plasma panel when there is no source present.

•CLAMP POSITION normally, leave this setting at [AUTO] (supported on Input1 only).

•SIGNAL specifies the output to the display.

CINEMAWALL				INPUT1	4.	OPTION Tab
PICTURE	SCREEN	SET UP		OPTION		• LANGUAGE allows selection of the desired language
	LANGUAGE		: ENGLISH			and what language will be set in the memory.
	ENERGY MODE		: AUTO			• ENERGY MODE selects for an intensified picture
	PDP PROTECT		: OFF			depending on ambient light conditions.
	ORBITER		: OFF
	SIDEBAR ADJ.		: OFF			• PDP PROTECT switches the displayed image at
	AUTO SET UP MODE : OFF					regular intervals.
	INPUT PRIORITY		: OFF
	AUDIO OUT LEVEL		: FIXED			• ORBITER prevents burn-in on static images.
						• SIDEBAR ADJ. for masking in 4x3 or NTSC signals.
						• AUTO SET UP MODE a is universal set up mode.
						• INPUT PRIORITY allows priority selection of an
					15	input.
						• AUDIO OUT LEVEL is for audio output.