Runco CW-50MC manual Setup Tab, Option Tab

Page 18

INSTALLER MENUS for VIDEO NTSC, PAL or ATSC

INSTALLER ADJUST Menus for Video NTSC, PAL or ATSC

These menus will appear only when displayed for video.

4.SETUP Tab

GAMMA is the relationship between pixel value and displayed intensity.

BRT. ENHANCE is used to enhance the black levels.

SUB VOLUME is used to configure sub-woofer levels.

INSTALLER ADJUST

 

 

 

INPUT 3

PICTURE

WHITE BAL.

SCREEN

 

SET UP

OPTION

 

GAMMA

 

:

2.0

 

 

BRT. ENHANCE

:

OFF

 

 

SUB VOLUME

:

20

 

5.OPTION Tab

PDP PROTECTION allows for automatic switching of the displayed image at regular intervals.

SCREEN MASK is used for masking of source material such as 16x9 or 4x3.

SIDEBAR ADJ. is used specifically for masking in 4x3 or NTSC signals

2x2 MODE is used for video wall applications. Up to

4 plasmas can be linked in a 2x2 configuration with no external processing.

MIRROR MODE allows for a reflected image to be shown from the plasma panel.

BAUD RATE is the RS-232 port connectivity rate.

ID. NO. SET is used for RS-232C daisy chaining of the plasma.

FUNCTION DEFAULT defaults to the factory settings for all the functions within the input.

INSTALLER ADJUST

 

 

INPUT 3

PICTURE

WHITE BAL.

SCREEN

SET UP

OPTION

 

PDP PROTECTION

 

 

SCREEN MASK

: OFF

 

SIDEBAR ADJ.

 

: NORMAL

 

2x2 MODE

 

: OFF

 

MIRROR MODE

 

: OFF

 

BAUD RATE

 

: 9600BPS

 

ID NO. SET

 

: 01

 

FUNCTION DEFAULT

 

6.OPTION Tab (continued)

OSD specifies if the On Screen Display is ON or OFF.

FRONT INDICATOR allows for naming of the display.

FAN CONTROL should be set to AUTO for lowest

fan noise.

COLOR MODE is used to select between NORMAL and ISF mode. Once in ISF, values selected in WHITE BAL. will be saved as settings in ISF. Once NORMAL is chosen setting are defaulted.

RUNCO PRO is for adjusting the underscan, setting markers, enable or disable of color and specifying the signal type.

FRC is usually set to Mode1.

INSTALLER ADJUST

 

 

INPUT 3

PICTURE

WHITE BAL.

SCREEN

SET UP

OPTION

 

OSD

 

 

 

FRONT INDICATOR

: OFF

 

FAN CONTROL

 

: AUTO

 

COLOR MODE

 

: NORMAL

 

RUNCO PRO

 

 

 

FRC

 

 

: MODE1

17

Image 18
Contents CW-43MC CW-50MC Contents Features and Benefits IntroductionAvertissement DOC compliance Notice DOC avis de conformationLimited Warranty What is Covered Under the Terms of this Limited WarrantyRIGHTS, Limits and Exclusions Operation General OverviewInputs and Controls Audio INPUT2 Stereo mini jack Main Power switchDigital RGB INPUT2 DVI-D jack-non Hdcp Audio Output Stereo mini jackConnecting the Plasma Display Modular Controller Card Input ConnectionsRemote Control Sensor Standby IndicatorOn Indicator Front PanelRemote Control Description Plasma Remote ControlMenus for Video NTSC, PAL or Digital 480P and Hdtv This menu will appear only when displayed for video Menus for PC/HDTV-I D-SUB Input Picture Tab White BAL. TabScreen Tab Setup Tab Option TabAspect Ratios Units wide Units tallRS-232C Adjustment Mode Data Format Protocol From computer to plasmas display RS-232C Commands How to read this tableCommand Full Name RS-232C Normal Numerical Command RS-232C Function PLN BRT. Enhance OFF UPO GET Commands GPI GET Picture Data Gets installer/Picture data GSS GET Status Setup Gets menu and installer Setup data GSO GET Status Option Gets menu and installer Option data Dimensions CW-50MC Plasma Specifications CW-43MC CW-50MCRUMA-011000 11-08-04