Runco CW-50MC manual Command RS-232C

	Name	Full Name	Adjustment	Validity	Direct	Description
	Command		RS-232C	Normal	Numerical
			Validity		Validity
F	FMK	SCREEN MASK: #####	●			Displays the current SCREEN MASK setting.
	FMKS00	SCREEN MASK: OFF	○			Sets the SCREEN MASK to OFF.
	FMKS02	SCREEN MASK: INVERSE	○			Sets the SCREEN MASK to INVERSE (negative-positive inversion)
	FMKS03	SCREEN MASK: WHITE	○			Turns ON the WHITE mask.
	FMKS04	SCREEN MASK: RED	○			Turns ON the RED mask.
	FMKS05	SCREEN MASK: GREEN	○			Turns ON the GREEN mask.
	FMKS06	SCREEN MASK: BLUE	○			Turns ON the BLUE mask.
	FMKS07	SCREEN MASK: YELLOW	○			Turns ON the YELLOW mask.
	FRC	FRC: #####	●			Displays the current FRC setting.
	FRCS01	FRC: MODE1	○			Sets FRC to MODE1.
	FRCS02	FRC: MODE2	○			Sets FRC to MODE2
	FRCS03	FRC: MODE3	○			Sets FRC to MODE3
	FRP	FRESH POSITION	○			Initializes the integrator and SCREEN adjustment values.
	FXO	AUDIO LEVEL OUT: FIX	○			Selects fixed audio output.
G	GHI	G. GAIN: ***	○		○	Adjusts the G. GAIN High.
	GLW	G. OFFSET: ***	○		○	Adjusts the G. OFFSET High.
	GPI	(GET PICTURE DATA)	●	●		Gets installer PICTURE data.
	GPS	(GET POSITION DATA)	●	●		Gets installer SCREEN data.
	GRA	GAMMA: ######	●			Displays the current GAMMA setting.
	GRAS01	GAMMA: 2.0	○			Sets the GAMMA to “2.0’
	GRAS02	GAMMA: 1.8	○	○		Sets the GAMMA to “1.8’
	GRAS03	GAMMA: 2.2	○	○		Sets the GAMMA to “2.2’
	GRAS04	GAMMA: DRE MID	○			Sets the GAMMA to “DRE MID’ (dynamic range expander)
	GRAS05	GAMMA: DRE HIGH	○			Sets the GAMMA to ‘DRE HIGH’
	GRAS06	GAMMA: DRE LOW	○			Sets the GAMMA to ‘DRE LOW’
	GRAS07	GAMMA: HIGH CNT.	○			Sets the GAMMA to “HIGH CONTRAST’
	GSL	G. SIDEBAR ADJ. LEVEL: ***	○		○	Adjusts the GREEN SIDEBAR ADJ.
	GSO	(GET STATUS OPTION DATA)	●	●		Gets OPTION data.
	GSS	(GET STATUS SETUP DATA)	●	●		Gets SETUP data.
	GST	(GET STATUS)	●	●		Gets STATUS.
	GWB	(GET WHITE BAL DATA)	●	●		Gets installer adjust WHITE BALANCE data.
H	HPS	H. SHIFT	○		○	Adjusts H. SHARPEN.
	HSI	V. SHIFT	○		○	Adjusts V. SHARPEN.
I	IDC	ID CLEAR	○			Clears the ID.
	DS	ID No. Set: **	○		○	Sets the ID.
	IN1	INPUT1	○	○		Switches the main screen to INPUT1.
	IN2	INPUT2	○	○		Switches the main screen to INPUT2.
	IN3	INPUT3	○	○		Switches the main screen to INPUT3.
	IN4	INPUT4	○	○		Switches the main screen to INPUT4.
	IN5	INPUT5	○	○		Switches the main screen to INPUT5.
	INP	INPUT#	●	●		Displays the current input function for the main screen.
	INPS01	INPUT1	○	○		Switches the main screen to INPUT1.
	INPS02	INPUT2	○	○		Switches the main screen to INPUT2.
	INPS03	INPUT3	○	○		Switches the main screen to INPUT3.
	INPS04	INPUT4	○	○		Switches the main screen to INPUT4.
	INPS05	INPUT5	○	○		Switches the main screen to INPUT5.

24