RS-232C ADJUSTMENT MODE
Interface
6)Protocol: From computer to plasmas display:
(1)When sending one command at a time:
STX (02 hex) 
ID (2 Byte) COMMAND (3 Byte or 6 Byte) 
ETX (03 hex)
(2) When transmitting commands in batches (up to max. 3 commands are possible): (NOTE)
| STX (02 hex) |
| ID (2 Byte) | COMMAND (3 Byte) | ARGUMENT (3 Byte) | ETX (03 hex) | |||
|
|
|
|
|
|
|
|
| |
COMMAND: | 3 Byte | (ASCII) | |||||||
ARGUMENT: | 3 Byte | (ASCII) | |||||||
(3) Echo back |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
| STX (02 hex) |
| COMMAND (3 Byte or 6 Byte) | ETX (03 hex) |
|
| |||
|
|
|
|
|
|
|
|
|
|
When the recieved command is a numerical direct effect command, numerical data is returned.
STX (02 hex) 
COMMAND (3 Byte) ARGUMENT (3 Byte) 
ETX (03 hex) When the recieved command is
STX (02 hex) 
ERR (3 Byte) ETX (03 hex)
When it is determined that the received command cannot be processed (when PON is received when the power is already ON, etc.) 'XXX' is returned.
STX (02 hex) ERR (3 Byte) ETX (03 hex)
21