Univex 1782X01, 1962, 1966, 1942, 1837, 1741, 1762 Adjusting the computer stand, Connector Description

Connector	Description
Ethernet connector	Used to attach an Ethernet cable for a local area network (LAN).
	Note: To operate the computer within FCC Class B limits, use a Category 5 Ethernet
	cable.
USB connector	Used to attach a device that requires a USB connector, such as a USB keyboard, a
	USB mouse, a USB scanner, or a USB printer. If you have more than six USB
	devices, you can purchase a USB hub, which you can use to connect additional
	USB devices.
Microphone connector	Used to attach a microphone to your computer when you want to record sound or if
	you use speech-recognition software.
DisplayPort out connector	Used to attach a high-performance monitor, a direct-drive monitor, or other devices
	that use a DisplayPort connector.
Serial port	Used to attach an external modem, a serial printer, or other devices that use a
	9-pin serial port.

Adjusting the computer stand

Your computer comes with a computer stand that you can use to adjust the computer to your comfortable position. Pull the stand open and adjust the position of the computer at an angle between 11° to 32°

as shown in the following illustration.

CAUTION:

Make sure that the angle is at least 11° from the vertical; otherwise, the computer might be unstable and fall over.

32

11

Figure 3. Adjusting the computer stand

10ThinkCentre User Guide