Univex 1741, 1962, 1966, 1782, 1942, 1837 Enabling or disabling a device, Selecting a startup device

Page 57

Note: A password can be any combination of up to 64 alphabetic and numeric characters. For more information, see “Password considerations” on page 44.

Enabling or disabling a device

This section provides information on how to enable or disable user access to the following devices:

USB Setup

Use this option to enable or disable a USB connector. When a USB connector is

 

disabled, the device connected to the USB connector cannot be used.

SATA Controller

When this feature is set to Disable, all devices connected to the SATA connectors

 

(such as hard disk drives or the optical drive) are disabled and cannot be accessed.

To enable or disable a device, do the following:

1.Start the Setup Utility program. See “Starting the Setup Utility program” on page 43.

2.From the Setup Utility program main menu, select Devices.

3.Depending on the device you want to enable or disable, do one of the following:

•Select USB Setup to enable or disable a USB device.

•Select ATA Drive Setup to enable or disable a SATA device.

4.Select the desired settings and press Enter.

5.Press F10 to save and exit the Setup Utility program. See “Exiting from the Setup Utility program” on page 46.

Selecting a startup device

If your computer does not start up from a device such as the disc or hard disk drive as expected, do one of the following to select the startup device you want.

Selecting a temporary startup device

Use this procedure to select a temporary startup device.

Note: Not all discs and hard disk drives are bootable.

1.Turn off your computer.

2.Repeatedly press and release the F12 key when turning on the computer. When the Startup Device Menu window displays, release the F12 key.

3.Select the desired startup device and press Enter. The computer will start up from the device you selected.

Note: Selecting a startup device from the Startup Device Menu window does not permanently change the startup sequence.

Selecting or changing the startup device sequence

To view or permanently change the configured startup device sequence, do the following:

1.Start the Setup Utility program. See “Starting the Setup Utility program” on page 43.

2.From the Setup Utility program main menu, select Startup.

3.Select the devices for the Primary Boot Sequence, the Automatic Boot Sequence, and the Error Boot Sequence. Read the information displayed on the right side of the screen.

4.Press F10 to save and exit the Setup Utility program. See “Exiting from the Setup Utility program” on page 46.

Chapter 7. Using the Setup Utility program 45

Page 56 Page 58
Image 57
Page 56 Page 58
Contents ThinkCentre User Guide Fourth Edition June Copyright Lenovo 2011 Contents Appendix A. Notices Appendix E. Energy Star model information Index Iv ThinkCentre User Guide Important safety information Service and upgradesStatic electricity prevention Extension cords and related devices Power cords and power adaptersPlugs and outlets External devicesHeat and product ventilation Operating environment Modem safety informationPower supply statement Cleaning and maintenanceLaser compliance statement ThinkCentre User Guide Product overview FeaturesColor temperature adjustment System management featuresInput/Output I/O features Power supplyPreinstalled operating system Preinstalled software programsSpecifications Software overviewSoftware provided by Lenovo Lenovo ThinkVantage Tools Lenovo Solution CenterLenovo Welcome Fingerprint SoftwareThinkVantage Password Manager Product RecoveryThinkVantage Power Manager ThinkVantage Rescue and RecoveryAdobe Reader Antivirus software ThinkVantage System UpdateLocations Communication UtilityFront connector, control, and indicator locations Rear connector locations Locating connectors on the rear of your computerConnector Description Adjusting the computer standMachine type and model label Machine type and model labelThinkCentre User Guide Frequently asked questions Using your computerUsing the keyboard Using Windows shortcut keysUsing the wheel mouse Using a fingerprint readerAdjusting audio About your computer audioSetting the volume from Control Panel Setting the volume from the desktopUsing CDs and DVDs Adding the volume icon to the taskbarUsing the single-touch and multi-touch feature Playing a CD or DVDRecording a CD or DVD Selecting a pre-defined color temperature Color temperature adjustmentUsing the single-touch feature Using the multi-touch featureSwitching to RGB adjustment Making brightness adjustmentRed-adjustment Green-adjustment Blue-adjustment Exit Using your computer ThinkCentre User Guide You and your computer Accessibility and comfortArranging your workspace ComfortGlare and lighting Air circulationElectrical outlets and cable lengths Replacement power cords Voltage-selection switchRegister your computer with Lenovo Moving your computer to another country or regionThinkCentre User Guide Security Security featuresUsing passwords Bios passwordsAttaching an integrated cable lock Setting the fingerprint reader Windows passwordsUsing and understanding firewalls Protecting data against virusesThinkCentre User Guide Installing or replacing hardware Installing or replacing hardwareInstalling external options Removing the monitor stand Replacing the USB keyboard or mouseConnecting the USB keyboard or mouse Replacing the wireless keyboardReplacing the wireless mouse Opening the battery compartment Obtaining device drivers Recovery information Creating and using recovery mediaCreating recovery media Using recovery media Performing backup and recovery operationsPerforming a backup operation Performing a recovery operation Using the Rescue and Recovery workspaceClick the Restore your system from a backup icon Creating and using a rescue medium Using a rescue mediumCreating a rescue medium Reinstalling preinstalled applications and device drivers Reinstalling preinstalled applicationsReinstalling preinstalled device drivers Reinstalling software programs Reinstalling device driversSolving recovery problems Recovery information ThinkCentre User Guide Using the Setup Utility program Starting the Setup Utility programViewing and changing settings Power-On Password Password considerationsAdministrator Password Hard Disk PasswordSelecting a startup device Enabling or disabling a deviceSelecting a temporary startup device Selecting or changing the startup device sequenceExiting from the Setup Utility program Using system programs Updating flashing the Bios from a discUpdating system programs Click Downloads and drivers Updating flashing the Bios from your operating systemUsing System Update Preventing problemsKeeping your computer current Getting the latest device drivers for your computerBasics Computer Cleaning your computerKeyboard Optical mouseGood maintenance practices Cleaning a glass-screen surfaceMoving your computer Basic troubleshooting Troubleshooting and diagnosticsTroubleshooting Troubleshooting procedureNo audio in Windows Audio problemsCD problems Sound comes from one external speaker onlyNo audio in DOS applications or games DVD problems CD or DVD does not workBlack screen instead of DVD video No audio or intermittent audio while playing DVD movie DVD movie will not playPlayback is very slow or choppy Invalid disc or no disc found messageIntermittent problems Keyboard, mouse, or pointing device problemsAll or some keys on the keyboard do not work Mouse or pointing device does not work Wireless keyboard does not workPointer on the screen does not move smoothly with the mouse Fingerprint reader does not workMonitor problems Wrong characters appear on the screenImage appears to be flickering Networking problems Ethernet problemsImage is discolored Your computer cannot connect to the network Wake on LAN feature is not workingClick Start Control Panel Click Hardware and Sound Adapter stops working for no apparent reasonWireless LAN problem Wireless WAN problemBluetooth problems An option that was just installed does not work Option problemsSound does not come from the Bluetooth headphone An option that previously worked does not work nowClick Disk Cleanup Performance and lockup problemsInsufficient free hard disk drive space Click Start ComputerPrinter problems Serial port problemsExcessive number of fragmented files Software does not work as expected Software problemsDiagnostic programs USB problemsCreating a diagnostic disc Lenovo Solution CenterLenovo ThinkVantage Toolbox PC-Doctor for DOSRunning the diagnostic program from a diagnostic disc ThinkCentre User Guide Getting information, help, and service Using the documentation and diagnostic program Help and serviceCalling for service Lenovo Support Web sitePurchasing additional services Using other servicesThinkCentre User Guide Appendix A. Notices Trademarks Export classification notice Appendix B. Regulatory informationTelevision output notice Electronic emissions noticesIndustry Canada Class B emission compliance statement Additional regulatory information ThinkCentre User Guide Appendix C. Weee and recycling information Important Weee InformationRecycling information Recycling information for Brazil Battery recycling information for TaiwanBattery recycling information for the European Union ThinkCentre User Guide Ukraine RoHS China RoHS Turkish RoHSIndia RoHS Windows 7 operating system Appendix E. Energy Star model informationThinkCentre User Guide Index Setting, changing, deleting Page 1P0B03427
Top Page Image Contents