Technicolor - Thomson TG784 manual Connecting a Dect Phone to Your Thomson Gateway

Page 38

5Telephony

5.3Connecting a DECT Phone to Your Thomson Gateway

Introduction

The Thomson Gateway is equipped with a DECT base station allowing you to connect up to five DECT phones. Before you can start using your DECT phone, you first have to register it to your Thomson Gateway. Once registered you will be able to make phone calls over the traditional (PSTN) phone network (if enabled by your telephone operator) or using VoIP (if configured).

Procedure

Proceed as follows:

1(Re)plug your Thomson DECT USB Adapter in the USB master port of your Thomson Gateway. For more information, see “5.2 Installing the Thomson DECT USB Adapter” on page 31.

2One of the LEDs on your Thomson DECT USB Adapter starts blinking. This indicates that you can now register your DECT phone. If the LED stops blinking before you were able to register, replug the Thomson DECT USB Adapter.

3Register your DECT phone. If you are using:

A Thomson DECT phone proceed with “ Registering your Thomson DECT phone” on page 32.

Another DECT phone, consult your DECT phone user documentation to register your DECT phone.

Registering your Thomson DECT phone

On the Thomson DECT phone:

1Select Menu.

2Navigate to Settings and press OK.

3Select Registration and press OK.

4Select Register Handset and press OK.

5Select in the base list the base to store this registration in and press OK.

It is possible to register your Thomson DECT phone to up to five different base stations. If a base in the list is marked with a green dot it is already used to store a specific registration with a base station. If not marked it is empty and can be used for a registration with a new base station.

6You are prompted to enter the system PIN code of the Thomson Gateway. Enter “0000“(default value) and press OK. Your Thomson DECT phone is now searching your Thomson Gateway base station.

7When the registration was successful, the message “Registered to base x” appears on the screen of your Thomson DECT phone.

32

E-DOC-CTC-20080421-0010 v1.0

 

Image 38
Contents Setup and User Guide Page Thomson TG784 Trademarks Contents Getting the Most Out of Your Thomson Gateway Documentation and software updates About this Setup and User GuideUsed Symbols Terminology Typographical ConventionsAbout this Setup and User Guide Installation IntroductionInternet connection details Preliminary StepsComputer requirements Voice over IP VoIP connection detailsGuided Installation Installing your Thomson GatewayInstallation methods Manual InstallationCase of problems Guided InstallationConnecting devices wait Starting the wizardCD menu Configure the Thomson Gateway Manual InstallationProcedure Click Setup my Thomson GatewayThomson Gateway Basics This chapterContent Thomson Gateway LED BehaviourStatus LEDs Power LEDWireless LED Ethernet LEDPhone LED Broadband LEDInternet LED WPS Button LED WPS LEDEthernet LEDs LED Status DescriptionRequirements Accessing the Thomson Gateway Web InterfaceThomson Gateway Web Interface Components MenuLanguage bar Login sectionContent pane Location barRestoring your configuration Backing Up/Restoring your ConfigurationBacking up your configuration Adding a New Computer to your Network Connecting a Computer Using the Ethernet Cable Ethernet cableWireless WPS button LED is blinking red Connecting Your Wireless Client via WPSWPS button LED is solid green Troubleshooting Where can I find the encryption? Connecting Your Wireless Client without WPSWhere can I find the SSID? Forgot your wireless settings?Encryption methods Securing Your Wireless ConnectionConfiguring the wireless encryption WPA-PSK versionsWireless Configuring WPA-PSK Encryption Select Use WPA-PSK EncryptionConfiguring WEP Encryption Select Use WEP EncryptionTelephony Old solutionThomson solution Voice over IP VoIPConnecting a Regular Phone to Your Thomson Gateway Installing the Thomson Dect USB Adapter Connecting a Dect Phone to Your Thomson Gateway Select Register Handset and press OKEnable the Telephony Service Configuring the Telephony ServiceConfigure the Telephony Service Assign Phone NumbersVerifying Telephone Connectivity Using Multiple IdentitiesSelect Service Enabled Multiple IdentitiesAddress Book Accessing the Address Book page?Using the Address book Managing contactsActivating services Telephony servicesChecking which services that you can use? Pick a task list, click View Telephony ServicesCall Forwarding Activating services on the web pagesUsing switching order commands To retrieve the call on hold when there is No active call Transfer a call Call Statistics Accessing the Telephony StatisticsViewing Telephony Statistics Feature availability Getting the Most Out of Your Thomson GatewayWhat do I need? Sharing Content on your NetworkConnecting your USB storage device to the Thomson Gateway Configure Content Sharing on the Thomson Gateway Server Description Setting Up the File ServerOn the Tools menu, click Content Sharing WorkgroupHow to access the shared content on Windows Open Windows ExplorerHow to access the shared content on Mac Result Managing your Shared ContentManaged Partition Under UPnP AV Media Server, click Server Enabled Using UPnP AV to Share Content with Media DevicesEnable UPnP AV on the Thomson Gateway Thomson UPnP AV ServerUnder FTP Server, click Server Enabled Accessing your Shared Content by FTPConfigure FTP access for your shared content Additional configuration Unmounting your USB storage device On the Toolbox menu, click Content SharingSafely Removing your USB Storage Device UPnP and the Thomson Gateway Universal Plug and PlaySupported Operating Systems Windows XP Accessing Your Thomson Gateway with UPnPWindows Vista Go to My Network PlacesOn the Windows Start menu, click Settings Control Panel Managing your Internet connection with UPnPDisabling this feature Extended Security Configuring UPnP on the Thomson GatewayEnable/Disable UPnP Enabling Extended SecurityAdding UPnP Installing UPnP on Windows XPStart menu, click Settings Control Panel Adding IGD Discovery and Control Solution Assigning a service HTTP, FTP,... to a computerProblem UPnP Assign a game or application to a local networking deviceDynamic DNS What you needGetting the Most Out of Your Thomson Gateway Internet Security OverviewCreating a new security level FirewallChanging the security level Pick a task list, click Create a new Security LevelWeb Site Filtering Access DeniedContent-based filtering Address-based filteringAction for Unknown Sites, select Option 2 address-based filter onlyOn the Toolbox menu, click Web Site Filtering Configuring the content-based filter Configuring The Content-based FilterIntroduction Accessing the configuration Creating your own content levelAdding Rules For The Address Based Filter Deny access to a specific Web siteAllow access to a specific Web site OptionsRedirect all Web sites Click Redirect in the Action listInternet Security Troubleshooting TopicsYour Thomson Gateway has not been found Setup wizard TroubleshootingSetup CD does not start automatically Thomson Gateway unreachable General Thomson Gateway TroubleshootingThomson Gateway does not work Poor Thomson Gateway performanceWired Connection Troubleshooting Ethernet LED does not light upPoor Wireless Connectivity or Range Wireless Connection TroubleshootingNo Wireless Connectivity Change the wireless channelCalling over VoIP Voice over IP TroubleshootingProblems with Supplementary Services Calling over PstnSoftware Reset Reset to Factory DefaultsResetting your Thomson Gateway MethodsHardware Reset Page Thomson Telecom Belgium