Technicolor - Thomson TG784 manual Verifying Telephone Connectivity, Multiple Identities

5Telephony

3In the Location bar, click Configure.

4Select Service Enabled.

5Click Apply.

Verifying Telephone Connectivity

Proceed as follows to verify the voice connection:

1Make sure the Thomson Gateway is turned on and ready for service.

2Check whether your phone is properly attached to the Thomson Gateway.

3Make sure the Internet telephony service is enabled and configured.

4The Phone LED must be solid green.

5Pick up your phone, wait for the dialling tone, and dial the number. If you dial a ‘#’ after the phone number, the phone number will be called over the regular telephone network.

The phone(s) attached to the Thomson Gateway can receive incoming VoIP calls, as long as your Thomson Gateway is turned on and the Phone LED is lit.

For calls over the analogue phone line, your phones are line-powered by the telephone company and can therefore always be reached, even if the Thomson Gateway is turned off.

Multiple Identities

You can assign up to three Internet telephone numbers or URIs to one or both phone ports, or you can assign a common number to both phone ports.

The phone numbers are provided by your provider.

Using Multiple Identities

Proceed as follows:

1Browse to the Thomson Gateway web pages.

2On the Toolbox menu, click Telephony.

3In the Location bar, click Configure.

4In the Pick a task list, click Use multiple identities.

5Click Add.

6Enter another URI, your user name and password.

7Choose the phone port for which you want to use this telephone number.

8Click Apply.

34 E-DOC-CTC-20080421-0010 v1.0