1 SpeedTouch™570 Installation
1.2 Preparing the SpeedTouch™570
Wall fixing assembly Part of the package is a wall mounting assembly which allows you to conveniently mount the SpeedTouch™570 on a wall.
Before you start, check for the following items:
•The wall fixing assembly
•2 screws and 2 wall plugs
•1 Velcro sticker.
To prepare the wall fixing assembly and the SpeedTouch™570 , proceed as follows:
Step | Action |
1Mark two hole horizontal positions, 134 mm (5.36 inches) apart:
2
3
Drill the marked holes with a 6mm (0.24 inches) diameter drill bit to a minimum depth of 35mm (1.38 inches).
Insert the wall plugs in the drilled holes, position the wall fixing assembly over the holes, insert the screws in the wall plugs and tighten them firmly:
4
Place the Velcro sticker on the wall fixing assembly in the marked area.
10 | 3EC 17766 BAAA TCZZA Ed. 01 |
|