Technicolor - Thomson Configure Your Router Using the 10.0.0.1 IP Address for Thomson Router

Page 24

1 SpeedTouch™570 Installation

1.4.2. Configuration Setup for other OSs

Supported OSs As the SpeedTouch™570 is OS-independent, this configuration setup can be used by any computer system

Note The following procedure may equally be used on MS Windows OSs.

TCP/IP Make sure that your Operating System has a valid TCP/IP configuration.

Configure the wireless computer for the correct default WLAN settings (See

“1.3 Wireless Connectivity” on page 13) and with a static “Net10” private IP address, e.g. 10.0.0.1. Ensure, however, that you do NOT use the 10.0.0.138 IP address as this is the default IP address of the SpeedTouch™570.

To ensure that IP connectivity exists, you can ping the SpeedTouch™570.

Procedure

Step

 

Action

 

 

1

To make sure that the SpeedTouch™570 is in its factory default state, perform

 

a reset to defaults.

 

 

2

Register the first-time WLAN client according to subsection “1.3.1. First-time

 

Wireless Client Connectivity” on page 15.

 

 

3

Open a web browser and browse to the SpeedTouch™570 's default IP

 

address 10.0.0.138. See chapter “2 SpeedTouch™570 Web Interface” on

 

page 29 for more information.

 

 

4

As a result the SpeedTouch™570 System info page appears.

 

Expand the Advanced Topics and click Upgrade to open the Upgrade page.

 

 

5

In the Configuration table you can overview the current (default) configura-

 

tion settings active on the SpeedTouch™570.

 

Click Browse to locate the configuration file on the CD-rom provided or disk.

 

Note

If the path is known you can immediately enter it in the location

 

 

input field.

 

 

6

Once the location to the appropriate configuration profile is selected, click

 

Upload.

 

 

 

7

The file will be uploaded to the SpeedTouch™570. Once uploaded, click

 

Restart to restart the SpeedTouch™570 and activate the uploaded configura-

 

tion.

 

 

 

8

After restarting the SpeedTouch™570 some additional configuration of your

 

computer system might be needed.

 

Note: The required settings for your computer should be provided by your

 

Service Provider, if applicable.

 

 

 

24

3EC 17766 BAAA TCZZA Ed. 01

 

Image 24
Contents SpeedTouch Page SpeedTouch Status Released Change Note PeckelbeenSShort Title CD-UG ST570 R2.0 Contents 3EC 17766 Baaa Tczza Ed SpeedTouch570 Installation SpeedTouch570 Installation Indicator Description Name Color StateGetting Acquainted with the SpeedTouch570 Indicator Description Name SpeedTouch570 back panel layoutStatus Preparing the SpeedTouch570 Step ActionStep Action Connect the power SupplyTurn on SpeedTouchWireless Connectivity 3EC 17766 Baaa Tczza Ed First-time Wireless Client Connectivity Successfully joined Wireless network SpeedTouch012345Make sure that all preconditions mentioned above are met Some Wlan clients do not automatically join a WLAN. If soConnecting other Wireless Clients SpeedTouch570 Configuration Setup onAlready registered and connected computer Address of your Wlan client is added to the ACL tablePages SpeedTouch570 Configuration Setup Another OS, e.g. Mac OS, Unix, Linux, etcConfiguration Setup for MS Windows OSs SpeedTouch Setup Wizard Detection procedureWizard will start automatically Start Run from the Start menu and enter the following pathStep Action Step Action Configuration Procedure Step Action SpeedTouch Setup wizard will appear again to announce that Configuration has been successfulInstructions provided by your ISP or network administrator Click finish to close the wizardConfiguration Setup for other OSs Procedure Step ActionWireless Client Connectivity on Address 10.0.0.138. See SpeedTouch570 Web Interface onStep Action SpeedTouch570 Internet Connectivity Embedded SpeedTouch Dial-in Application PPP session Step Action Access to the SpeedTouch570 web interface To access the SpeedTouch570 web pagesSpeedTouch570 Web Interface SpeedTouch570 Web InterfaceSystem Setup UpgradeSystem menu Click Dial-in 3EC 17766 Baaa Tczza Ed System Tasks 3EC 17766 Baaa Tczza Ed Upgrade software may be made available from your Service Click Switch overSaved configurations remain unchanged Click Remove passive to remove a passive software versionSpeedTouch570 Web Interface Other Places Tasks Click Apply to apply your selection 3EC 17766 Baaa Tczza Ed 3EC 17766 Baaa Tczza Ed 3EC 17766 Baaa Tczza Ed 3EC 17766 Baaa Tczza Ed SpeedTouch570 Web Interface Troubleshooting and Specifications Troubleshooting and SpecificationsLED indication Description Name Color State Problem Solution Variant is used for your DSL service Case of ADSL/POTS services at yourCase of ADSL/ISDN services at your ADSL/POTS variantMake sure the SpeedTouch570 is powered on Proceed as followsPage Built for excellence