Technicolor - Thomson 570i manual Step Action

Page 21

1 SpeedTouch™570 Installation

Step

Action

6The setup wizard should find your SpeedTouch™570 device on the local network. This is indicated by following window:

If the Setup wizard does not find an SpeedTouch™570 on the network an error window pops up. In this case check:

•Whether your PC is correctly wired to the SpeedTouch™570 or the WLAN client is correctly registered to the SpeedTouch™570 WLAN as described in “1.3.1. First-time Wireless Client Connectivity” on page 15.

•That no dedicated firewall device or router is placed between your PC and the SpeedTouch™570 and that no personal firewall software is running on your PC

•Whether the SpeedTouch™570 is powered on and fully initialized.

Note In case of MS Windows 95 or Windows NT4.0 it is advised to configure the PC with a static IP address, e.g. 10.0.0.1. Make sure however not to use the IP address 10.0.0.138 as it is the Speed- Touch™570 's default IP address.

To repeat the search for the SpeedTouch™570, click Back and proceed with step 5 of this procedure.

7To continue with the configuration of the SpeedTouch™570 and your PC, proceed with the configuration procedure described below

3EC 17766 BAAA TCZZA Ed. 01	21

Image 21

Contents SpeedTouch Page SpeedTouch Status Released Change Note PeckelbeenSShort Title CD-UG ST570 R2.0 Contents 3EC 17766 Baaa Tczza Ed SpeedTouch570 Installation SpeedTouch570 Installation Indicator Description Name Color StateGetting Acquainted with the SpeedTouch570 Indicator Description Name SpeedTouch570 back panel layoutStatus Step Action Preparing the SpeedTouch570Step Action Supply Connect the powerTurn on SpeedTouchWireless Connectivity 3EC 17766 Baaa Tczza Ed Successfully joined Wireless network SpeedTouch012345 First-time Wireless Client ConnectivityMake sure that all preconditions mentioned above are met Some Wlan clients do not automatically join a WLAN. If soSpeedTouch570 Configuration Setup on Connecting other Wireless ClientsAlready registered and connected computer Address of your Wlan client is added to the ACL tablePages Another OS, e.g. Mac OS, Unix, Linux, etc SpeedTouch570 Configuration SetupSpeedTouch Setup Wizard Detection procedure Configuration Setup for MS Windows OSsWizard will start automatically Start Run from the Start menu and enter the following pathStep Action Step Action Configuration Procedure Step Action Configuration has been successful SpeedTouch Setup wizard will appear again to announce thatInstructions provided by your ISP or network administrator Click finish to close the wizardProcedure Step Action Configuration Setup for other OSsWireless Client Connectivity on Address 10.0.0.138. See SpeedTouch570 Web Interface onStep Action SpeedTouch570 Internet Connectivity Embedded SpeedTouch Dial-in Application PPP session Step Action To access the SpeedTouch570 web pages Access to the SpeedTouch570 web interfaceSpeedTouch570 Web Interface SpeedTouch570 Web InterfaceSystem Setup UpgradeSystem menu Click Dial-in 3EC 17766 Baaa Tczza Ed System Tasks 3EC 17766 Baaa Tczza Ed Click Switch over Upgrade software may be made available from your ServiceSaved configurations remain unchanged Click Remove passive to remove a passive software versionSpeedTouch570 Web Interface Other Places Tasks Click Apply to apply your selection 3EC 17766 Baaa Tczza Ed 3EC 17766 Baaa Tczza Ed 3EC 17766 Baaa Tczza Ed 3EC 17766 Baaa Tczza Ed SpeedTouch570 Web Interface Troubleshooting and Specifications Troubleshooting and SpecificationsLED indication Description Name Color State Problem Solution Case of ADSL/POTS services at your Variant is used for your DSL serviceCase of ADSL/ISDN services at your ADSL/POTS variantProceed as follows Make sure the SpeedTouch570 is powered onPage Built for excellence