Technicolor - Thomson 605S manual Error window pops up. In this case check

Page 15

1 SpeedTouch™ Installation

8The Setup wizard should find your SpeedTouch™ device on the local network. This is indicated by the following window:

In case more than one SpeedTouch™ device is found, a listing is provided from which you can select your SpeedTouch™.

Note	If the Setup wizard does not find any SpeedTouch™ on the network an
	error window pops up. In this case check:
	•	Whether the SpeedTouch™ is turned on and fully initialized.
	•	Whether your PC is correctly connected to the SpeedTouch™
		and has a valid IP address (i.e. any IP address but 0.0.0.0).
	•	Whether no dedicated firewall device or router is placed
		between your PC and the SpeedTouch™ and whether no
		personal firewall software is running on your PC.

To repeat the search for the SpeedTouch™, click Back and proceed with step 7 of this procedure.

9To continue with the configuration of your SpeedTouch™ and your PC, proceed with the configuration procedure described below.

E-SIT-CTC-20030605-0003 v1.0	11

Image 15

Contents SpeedTouch605s Page SpeedTouch605s Status Change Note PeckelbeenS Short Title Setup and Users Guide ST605s R4.2 enContents SpeedTouch Napt Manager SpeedTouch Installation Getting Acquainted with the SpeedTouch Indicator Description Name Color StateDSL Port Service Port pinning Indicator Name Color State DescriptionSetting up the SpeedTouch SpeedTouch Configuration Setup SpeedTouch Configuration Setup for Microsoft Windows Operating SystemsSetup wizard Microsoft WindowsClick Initial Setup Detection procedureConfiguration setup, this window will not be shown Error window pops up. In this case check Configuration procedure Your computer Configuration Setup for other Operating Systems Templates Service Provider, if applicable Dr SpeedTouch Installation SIT-CTC-20030605-0003 Tion or press F1 context sensitive help SpeedTouch Installation Microsoft Windows XP SpeedTouch Internet ConnectivityIntroduction Adding UPnP to aSurfing the Internet Connect to the Internet via SpeedTouch’s embedded PPP client Starting an Internet session via Windows XP’s UPnP Internet Sessions via Windows XP’s UPnPTerminating an opened PPP session Internet Sessions via the SpeedTouch Web Pages all OSsConnect to the Internet via a Broadband Dial-in Client Configuring a dial-in connection on a Windows XP platform Using the Windows XP Dial-in ClientSIT-CTC-20030605-0003 Starting a dial-in Internet session from Windows XP Using the Mac OS X Dial-in Client OS X platformStarting a dial-in connection on a Mac OS X platform SpeedTouch Web Interface Access to the SpeedTouch web interface via UPnPBasic topic menu Click System Information ConnectionsSystem Log IP Addresses Advanced topic menu Click DiagnosticsEasy Setup System PasswordBasic Topics Menu Links SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 Advanced Topics Menu Links Templates SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 Napt Manager on SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 Use of DNS subdomains is supported, e.g. dsl.office.lan SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SpeedTouch Web Interface SpeedTouch Napt Manager Using SpeedTouch Napt Manager Detection procedureClick Configure NAT Settings Error window pops up. In this case check that Details or continue with the configuration SIT-CTC-20030605-0003 SpeedTouch Napt Manager Click Check for new System Software SpeedTouch System Software UpgradeSpeedTouch Upgrade Wizard Upgrade, this window will not be shown Appropriate file SIT-CTC-20030605-0003 Important note Manual System Software Management via Bootp ServerSpeedTouch system Software managementSIT-CTC-20030605-0003 SpeedTouch System Software Upgrade Troubleshooting General Problem SolutionReset to default configuration SpeedTouch Default ConfigurationTroubleshooting Page Built for excellence