Technicolor - Thomson 605S manual SIT-CTC-20030605-0003

Page 67

5 SpeedTouch™ System Software Upgrade

5While holding the Defaults button, power on the SpeedTouch™ and keep holding the Defaults button until the Power/System, Line Tx and Line Rx LEDs lit green (approximately six seconds). This indicates that the SpeedTouch™ entered BOOTP mode and is sending BOOTP requests.

6The BOOTP server will reply to the BOOTP requests and will perform the required operations to send the system software to the SpeedTouch™.

7After checking whether the received system software is valid for the device, the SpeedTouch™ will start in normal operational mode to complete the upgrade.

8Optionally, you can upload the backup configuration as described in “ System” on page 47.

E-SIT-CTC-20030605-0003 v1.0	63

Image 67

Contents SpeedTouch605s Page SpeedTouch605s Status Change Note PeckelbeenS Short Title Setup and Users Guide ST605s R4.2 enContents SpeedTouch Napt Manager SpeedTouch Installation Getting Acquainted with the SpeedTouch Indicator Description Name Color StateDSL Port Service Port pinning Indicator Name Color State DescriptionSetting up the SpeedTouch SpeedTouch Configuration Setup SpeedTouch Configuration Setup for Microsoft Windows Operating SystemsSetup wizard Microsoft WindowsClick Initial Setup Detection procedureConfiguration setup, this window will not be shown Error window pops up. In this case check Configuration procedure Your computer Configuration Setup for other Operating Systems Templates Service Provider, if applicable Dr SpeedTouch Installation SIT-CTC-20030605-0003 Tion or press F1 context sensitive help SpeedTouch Installation Microsoft Windows XP SpeedTouch Internet ConnectivityIntroduction Adding UPnP to aSurfing the Internet Connect to the Internet via SpeedTouch’s embedded PPP client Starting an Internet session via Windows XP’s UPnP Internet Sessions via Windows XP’s UPnPTerminating an opened PPP session Internet Sessions via the SpeedTouch Web Pages all OSsConnect to the Internet via a Broadband Dial-in Client Configuring a dial-in connection on a Windows XP platform Using the Windows XP Dial-in ClientSIT-CTC-20030605-0003 Starting a dial-in Internet session from Windows XP OS X platform Using the Mac OS X Dial-in ClientStarting a dial-in connection on a Mac OS X platform SpeedTouch Web Interface Access to the SpeedTouch web interface via UPnPConnections Basic topic menu Click System InformationSystem Log IP Addresses Advanced topic menu Click DiagnosticsEasy Setup System PasswordBasic Topics Menu Links SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 Advanced Topics Menu Links Templates SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 Napt Manager on SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 Use of DNS subdomains is supported, e.g. dsl.office.lan SIT-CTC-20030605-0003 SIT-CTC-20030605-0003 SpeedTouch Web Interface SpeedTouch Napt Manager Using SpeedTouch Napt Manager Detection procedureClick Configure NAT Settings Error window pops up. In this case check that Details or continue with the configuration SIT-CTC-20030605-0003 SpeedTouch Napt Manager Click Check for new System Software SpeedTouch System Software UpgradeSpeedTouch Upgrade Wizard Upgrade, this window will not be shown Appropriate file SIT-CTC-20030605-0003 Important note Manual System Software Management via Bootp ServerSpeedTouch system Software managementSIT-CTC-20030605-0003 SpeedTouch System Software Upgrade Troubleshooting General Problem SolutionReset to default configuration SpeedTouch Default ConfigurationTroubleshooting Page Built for excellence