Chapter 5
Getting the Most Out of Your Thomson Gateway
5.1.3Configuring UPnP on the Thomson Gateway
Introduction
On the Thomson Gateway Web Interface you can:
>
>
Enable/Disable UPnP
Extended Security
Enable/Disable UPnP
Proceed as follows:
1Browse to the Thomson Gateway Web Interface.
2On the Toolbox menu, click Game & Application Sharing.
3Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4Click Apply.
Extended Security
If Extended Security is enabled only limited UPnP operation between the host and the Thomson Gateway is allowed:
>A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You can then only connect/disconnect the Internet connection via the Thomson Gateway Web Interface
>Address translation mappings can only be added or changed via UPnP for the host on which the UPnP application is running.
Enabling Extended Security
Proceed as follows:
1Browse to the Thomson Gateway Web Interface.
2On the Toolbox menu, click Game & Application Sharing.
3Under Universal Plug and Play, select Use Extended Security.
4Click Apply.
32 | |
|