Chapter 6
Internet Security
6.2Web Site Filtering
Introduction
The Thomson Gateway allows you to deny access to specific web sites.
Access Denied page
When a user tries to access a page that is being blocked, the following page is displayed:
Address-based filtering
With
Proceed as follows:
1Browse to the Thomson Gateway Web Interface.
2On the Toolbox menu, click Web Site Filtering.
3On the Navigation bar, click Configure.
4Make sure that the Use Address Based Filter check box is selected.
5In the Action for Unknown Sites, select:
Allow as the default rule if you want to allow access to all web sites and manually specify which web sites may not be accessed.
Block as the default rule if you want to deny access to all web sites and manually specify a number of web sites that may be accessed.
6Click Apply.
7If you want to make exceptions for specific web sites, add the necessary rules in the
41 | |
|