Playing the connected source
DIGITAL INPUT
DVD | DVD |
Setting the digital inputs
When connecting digital source components to the DIGITAL INPUT jacks on the rear panel, assign the input source button on the front panel to either a DIGITAL INPUT OPTICAL or COAXIAL jack depending on the type of connector on the digital source components. The DVD, CD, VIDEO 1, VIDEO 2, VIDEO 3 and TAPE inputs can be assigned to the DIGITAL INPUT jacks.
With the initial setting, the OPTICAL 2 connector is assigned to the CD input, COAXIAL is assigned to the DVD input and OPTICAL 1 is assigned to the TAPE input, and no input connector is assigned to the VIDEO
For example, follow the steps below to assign OPTICAL 1 to the DVD device connected to the DIGITAL INPUT OPTICAL 1 jack.
1.Press DVD.
The DVD input is selected and “DVD” appears in the display.
2.Press DIGITAL INPUT.
The current DVD setting (COAX) appears.
Default setting
Input source | Digital input |
CD | OPTICAL 2 |
TUNER |
|
TAPE | OPTICAL 1 |
VIDEO 3 | – – – – |
VIDEO 2 | – – – – |
VIDEO 1 | – – – – |
DVD | COAXIAL |
–– – 
: Not available for digital input.
3.Press DIGITAL INPUT repeatedly to select “OPT 1”.
Pressing DIGITAL INPUT repeatedly will change the setting as follows:
Select if connected to DIGITAL INPUT
COAXIAL.
Select if connected to DIGITAL INPUT
OPTICAL 1.
Select if connected to DIGITAL INPUT
OPTICAL 2.
Select if the input source is not from a digital input jack.
About three seconds after “DVD ← OPT1” is selected, the original display appears and the setting is completed.
If you have selected digital input, you can also select the input signal format (refer to “Setting the input signal format” on page 28).
22