Speaker setup
SPEAKER ADJUST
PRESET/ADJUST ™/£
You need to set up the speaker configuration for the speaker system connected to the FRONT SPEAKERS A connectors (see page 13).
(There is no speaker configuration setup for the SPEAKERS B system.)
Notes
•Speaker setup cannot be done if;
–Headphones are connected (see page 26),
–The FRONT SPEAKERS B system is on (see page 26),
–“Multi ch” is selected with AUDIO SELECTOR button, or
–Connected source is played.
•It is not necessary to set the parameters again once you have completed the setup unless you change the speaker configuration.
Selecting the number of speaker channels
1.Press SPEAKER ADJUST.
When the button is pressed, the current speaker setup will be displayed.
2.Press PRESET/ADJUST ™/£ repeatedly to select the number of channels.
Front left | Center |
| Front right | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setting the crossover frequency
To reproduce low frequencies between 80 Hz and 120 Hz in an optimum condition, set the crossover frequency according to the
1.Press SPEAKER ADJUST twice.
The current setting is displayed.
2.Press PRESET/ADJUST ™/£ repeatedly to select the crossover frequency.
Select from 80 Hz, 100 Hz and 120 Hz.
Refer to the following example for deciding the setting.
•When other speakers than the subwoofer are relatively small (when they cannot reproduce low frequencies sufficiently): 120 Hz
•When other speakers than the subwoofer are relatively large (when they can reproduce low frequencies sufficiently): 80 Hz
If you want more accurate setting, refer to the instruction manuals of the speakers and perform the setting according to their reproduce frequency bands. Also listen to the actual sound and set to the high position (120 Hz) if you feel that the sound from the subwoofer is not enough or to the low position (80 Hz) if you feel that the sound is loud.
Surround left | Surround right |
Display and number of speaker channels
Speaker 5ch
Speaker 2ch
Speaker 3ch
Speaker 4ch
Note
The listening mode will automatically change according to the number of channels if you set the number of channels.
18