Various functions common to all the sources
SLEEP DIMMER
DISPLAY DIMMER
Changing the display
Press DISPLAY.
Each time you press DISPLAY, the screen changes as follows:
When an input source other than FM or AM is selected
Input source + volume
Program format*
Input source + Listening mode (or Multich)
Press DISPLAY once to initiate the program format display. Pressing the button again switches the display to the other display.
*If the input signal does not have a program format, then this will be skipped. The format display returns to the previous display after the format display has lasted for about three
seconds ()
When FM or AM is selected as the input source
FM/AM frequency +
Preset no.
FM/AM + Listening mode
When an RDS station broadcasting PS information is settled as the input source (European models only)
Press DISPLAY once to initiate the frequency display. Pressing the button again switches the display to the other display.
Program Service
Name + Preset no.
FM frequency +
Preset no.*
FM + Listening mode
Controlling the brightness of the lights on the AV Receiver
Press DIMMER.
Each press of the button changes the brightness as follows:
→The display becomes less bright.
↓
The display is dimmed.
↓
The display becomes bright.
Using the sleep timer (remote controller only)
Press SLEEP.
“Sleep 90 min” appears in the multipurpose display for about 5 seconds, which means the AV Receiver will turn off and enter standby mode in 90 minutes. Also the SLEEP indicator is lit in the display while the sleep timer is on.
SLEEP indicator
Each press of the button makes the remaining time shorter by 10 minutes.
Checking the remaining time
Press SLEEP while the sleep timer is On.
The remaining time is displayed.
If you press SLEEP while the remaining time is displayed, the remaining time is reduced by 10 minutes.
Canceling the sleep timer
Press SLEEP repeatedly until the SLEEP indicator goes off.
* The frequency display returns to the previous display after the
frequency display has lasted for about 5 seconds ( | ). |
| 27 |