Leds
POWER | On, if the printer is powered on. | ||
|
|
|
|
LQ | On, if the Letter Quality mode is selected. | ||
|
| ||
P1, P2, | Indicate the currently selected configuration both in normal printing mode and | ||
P3, P4 | during the Printer Setup procedure. See “ | Printer Setup | ” later in this section. |
| If the INTERFACE TYPE function is set to auto+blink, when line 1 (parallel | ||
| interface) is selected for data transmission, the P1 indicator blinks. | ||
| If the INTERFACE TYPE function is set to auto+blink, when line 2 (serial interface) | ||
| is selected for data transmission, the P2 indicator blinks. | ||
| In case of fault condition P1, P2, P3 and P4 blink. | ||
|
| ||
ON LINE | On, if the printer is online. | ||
| Off, if the printer is offline. | ||
| Blinks, when receiving printing data from host. | ||
|
|
|
|
In case of a printer fault during the initialization of the LQ, P1, P2, P3, P4 and ON LINE indicators blink contemporaneously. Turn the printer off and on again. If the problem is not solved, call the Customer Service.
21