| Setup Parameter | Values | Description |
|
|
|
|
| LINE MODE | LF=LF, CR=CR | If the printer receives a LF code (LF), it only performs a line feed. If |
|
|
| the printer receives a CR code (CR), it only performs a carriage |
|
|
| return. |
|
| CR=LF+CR | If the printer receives a CR code (CR), it performs a carriage return |
|
|
| followed by a line feed. If the printer receives a LF code (LF), it |
|
|
| performs a line feed. |
|
| LF=LF+CR | If the printer receives a LF code (LF), it performs a line feed followed |
|
|
| by a carriage return. If the printer receives a CR code (CR), it only |
|
|
| performs a carriage return. |
|
| LF&CR=LF+CR | If the printer receives a LF code (LF) or a CR code (CR), it performs |
|
|
| both a line feed and a carriage return. |
|
|
|
|
| WRAP MODE | truncate, autowrap | The data exceeding the line length are truncated (truncate) or |
|
|
| printed on the following line (autowrap). |
|
|
|
|
| SLASHED ZERO | no, yes | Selects the printing character for zero, with a slash (yes) or without |
|
|
| (no). |
|
|
|
|
| PRINT DIRECTION | unidir., bidir., | Selects the printing direction of the print head: unidirectional |
|
| sw control | (unidir.), bidirectional (bidir.) or selected via software (sw |
|
|
| control). |
|
|
|
|
| EJECT ON FF | no, yes | Performs a form feed according to the selected page format (no) or |
|
|
| ejects a cut sheet loaded into the printer (yes). |
|
|
|
|
| CUT SHEET EJECT | on front, on rear | Selects whether the cut sheet loaded into the printer is ejected |
|
|
| towards the front or the rear of the printer. The selection of the paper |
|
|
| ejection towards the rear of the printer should be selected only for |
|
|
| paper with a length of at least 14 cm (5,5 inch). |
|
|
|
|
|
|
|
|
|
|
| 40 |