Seiko Group FB300 manual Park Mode, Tear Mode

Setup Parameter	Values	Description
PARK MODE	immediate	When pressing the PARK key or receiving a park command, the printer
		immediately parks the paper.
	manual imm.	When pressing the PARK key, the printer automatically parks the
		paper. When receiving a park command via software:
		1.	If the current page is not empty (there is printing data or paper
			movement commands have been issued), a form feed is performed.
		2.	The paper is moved to the tear-off position.
		3.	The P1, P2, P3 and P4 leds blink.
		4.	When the ON LINE key is pressed the printer parks the paper.
	after tear	When pressing the PARK key or receiving a park command via
		software:
		1.	If the current page is not empty (there is printing data or paper
			movement commands have been issued), a form feed is
			performed.
		2.	The paper is moved to the tear-off position.
		3.	The P1, P2, P3 and P4 leds blink.
		4.	When the ON LINE key is pressed the printer parks the paper.
TEAR MODE	auto 1s, auto 2s,	Selects the way the tear mode is performed. Selecting auto 1s,
	auto 3s, auto 4s,	auto 2s, auto 3s, auto 4s, or auto 5s, the printer moves
	auto 5s, manual,	the paper in the tear-off position and back to the printing position after
	no tear/reverse	the corresponding number of seconds. Selecting manual, the tear-off is
		performed manually, pressing the ON LINE key. Selecting no tear/
		reverse, the printer does not perform the tear-off function (this is
		useful, when printing on labels).
			41