Sharp XV-Z17000 Setting Up the Projector, Standard Setup Front Projection, Lens center

Setting Up the Projector

Setting Up the Projector

For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat and level.

Note

•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

•For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

Standard Setup (Front Projection)

Place the projector at the required distance from the screen according to the desired picture size.

Example of standard setup

Side View

Screen

H

90° Lens center

L

Note

•Refer to page 18 for additional information concerning “Screen Size and Projection Distance”.

-16