Sharp XV-Z17000 Switching the Input Mode, Adjusting the Vertical Horizontal Position Image

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press HDMI1, 2, COMPONENT, S-VIDEO, VIDEO or COMPUTER on the remote control to select the input mode.

•When you press INPUT on the projector or on

the remote control, the INPUT list appears. Press P/R to switch the INPUT mode.

INPUT list

INPUT

HDMI1

HDMI2

COMPONENT

COMPUTER

S-VIDEO

VIDEO

Note

•When you switch the INPUT mode, the image as shown below will be displayed in the upper right corner of the screen. (You can confirm the selected input mode and information on the input signal.)

HDMI1

YPbPr

1080P

•When is displayed, “3D” is set to “On”.

•If is displayed, it means that a 3D image signal that can be automatically detected is being input.

Adjusting the Vertical and

Horizontal Position of the

Image

1 Press IMAGE SHIFT to enter the image shift mode.

• The image shift menu guide appears.

IMAGE SHIFT	H: 0	V: 0
END	ADJUST
	RESET

Selectable buttons		Description
ENDIMAGE SHIFT	Exits the image shift mode.
ADJUSTP/R/O/Q	Adjusts the image shift.
RESETRETURN	Returns to a default setting.

HDMI1, 2, COMPONENT,

S-VIDEO, VIDEO, COMPUTER buttons

IMAGE SHIFT button

Adjustment buttons (P/R/O/Q)

INPUT button

2 Press P/R/O/Q to adjust the vertical and horizontal position of the image.

H-Image Shift

Selectable items	\ button	button
H-Image Shift	Leftward	Rightward

\ button button

				Basic
V-Image Shift				Operation
Selectable items	" button		' button
V-Image Shift	Downward		Upward
" button		' button

Note

•To return to the default setting, press RETURN when the image shift menu guide is still on the screen.

•The adjustable range of the image shift may vary depending on:

-the Resize mode

-the Picture mode

-the input signal resolution

- the input 3D signal type -27