Sharp XV-Z17000 Turning the Projector On/Off, Connecting the Power Cord, About the Lamp Indicator

Page 25

Turning the Projector On/Off

Connecting the Power Cord

Plug the supplied power cord into the AC socket on the rear of the projector.

•The power indicator illuminates red, and the projector enters standby mode.

Turning the Projector On

Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 20 to 23.)

Open the lens shutter fully and press STANDBY/ON on the projector or ON on the remote control.

•The power indicator illuminates green.

•After the lamp indicator illuminates, the projec- tor is ready to start operation.

•When the lens shutter is closed, the power indicator blinks alternately green and orange and the projector does not turn on.

Note

•About the Lamp Indicator

The lamp indicator illuminates to indicate the status of the lamp.

Green: The lamp is on.

Blinking in green: The lamp is warming up.

Red: The lamp is shut down abnormal- ly or the lamp should be replaced.

•When switching on the projector, a slight ﬂickering of the image may be experienced within the ﬁ rst minute after the lamp has been illuminated. This is normal operation as the lamp's control circuitry is stabilizing the lamp output characteristics. It should not be regarded as faulty operation.

•If the projector is put into standby mode and immediately turned on again, the lamp may take some time to start projection.

Turning the Power Off (Putting the Projector into Standby Mode)

Press STANDBY/ON on the projector or STANDBY on the remote control, then press that button again while the conﬁr- mation message is displayed, to put the projector into standby mode.

• The projector cannot be turned on while cooling.

Power cord (supplied)

Info

•English is the factory default language. If you want to change the on-screen display to another language, change the language according to the procedure on page 45.

Power indicator

STANDBY/ON button

Lamp indicator

Lens shutter	Basic
STANDBY button	Operation
STANDBY button
ON button

On-screen display

Info

•Direct Power Off function:

You can unplug the power cord from the AC outlet even if the cooling fan is still running.

-23

Image 25

Contents XV-Z17000 Special Note for Users in the U.K See bottom of projector IntroductionDeclaration of conformity InformationInfo Indicates safeguards for using the projector Using the Menu ScreenContents Reference Appendix Maintenance Maintenance Indicators Regarding the LampAccessories CleaningPower-Cord Protection Damage Requiring ServiceRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesUsing the 3D Glasses Other connected equipmentSupplied accessories AccessoriesOptional accessories Projector Part Names and FunctionsTerminals Projector Rear ViewRemote Control When using the remote control Using the Remote ControlInserting the Batteries Usable RangePlace the projector facing a screen Quick StartAdjust the projector angle, focus and zoom Select the input modeTurn the power off Turn the video equipment on and start playbackSetting Up the Projector Setting Up the ProjectorStandard Setup Front Projection Example of standard setupCeiling-mount Setup Projection PRJ ModeScreen Size and Projection Distance Samples of Cables for Connection You may need other cables or connectors not listed belowConnecting to Equipment with S-video Output Terminal Connecting to Video EquipmentConnecting to a Computer Using the RGB Cable Connecting to a ComputerControlling the Projector by a Computer For details on RS-232C speciﬁcations and commands, seeAbout the Lamp Indicator Connecting the Power CordDirect Power Off function Turning the Projector On/OffAdjusting the Focus Adjusting the Projected ImageAdjusting the Picture Size Adjusting the HeightPress P/R/O/Q to adjust Keystone Correction Press Keystone to enter the keystone modeKeystone Correction Press KeystonePress P/R/O/Q to adjust Rotation Correction mode Press P/R/O/Q to adjust Sphere Correction modePress P/R to select SPHERE, and then press Enter  SphereAdjusting the Vertical Horizontal Position Image Switching the Input ModePress Image Shift to enter the image shift mode Image ShiftSelecting the Picture Mode Auto Sync Auto Sync AdjustmentDisplaying the Black Screen Temporarily Freezing a Moving ImageSwitching the Eco+Quiet Mode Switching the Iris SettingDisplaying an Enlarged Portion of an Image Hiding the Menu TemporarilyPress Resize on the projector or on the remote control Resize ModeResize Mode Resize buttonAbout Copyrights Picture menu Menu Bar ItemsUseful Features 3D Menu Menu Selections Adjust- ments Using the Menu ScreenPress Menu You want to adjust To adjust the projected image while viewing itPress or \ to adjust the item selected Press or to select the item1Selecting the Picture Mode Picture Adjustment Picture Menu2Adjusting the Image 7Adjusting the Colors 3Switching the Iris Setting5Using the Advanced 4Eco+QuietS. color adjustment screen 9Selecting the Film Mode 8Adjusting the Bright Boost0Setting Detail Enhancement EResetting All Adjustment Items1Adjusting the Computer Image Computer Image Adjustment SIG-ADJ Menu2Setting the Resolution 3Auto Sync Auto Sync Adjustment8Signal Info 5Setting the Video System 7Adjusting the Dynamic Range6Setting the Video Setup 1Setting the Resize Mode Adjusting the Projected Image SCR-ADJ Menu2Adjusting the Image Position 3Adjusting the Overscan4Auto V-Keystone Correction 5Keystone Mode CorrectionOr Q 7Setting the Brightness Menu Screen 6Setting On-screen Display8Selecting the Background Image 9Selecting the Menu Screen Position3Setting One Touch Play, System Standby and Input Name Adjusting the Projector Function PRJ-ADJ Menu1Setting Auto Power Off Mode 2Setting the Power Save Mode Economy Mode6Fan Mode Setting 4Setting the Demo Mode7Returning to the Default Settings 8Lamp Timer LifeEnjoying 3D Image Viewing Precautions on using 3D Glasses Epilepsy As you get more comfortable viewing 3D imagesPart Names Supplied Accessories for 3D GlassesReplacing the Button Cell Battery Before Using the 3D GlassesClose the battery cover Insert the screw to secure the batAttaching the Nose Pad Using the 3D GlassesAttaching the 3D Glasses Band Usage Range of the 3D GlassesWhen 3D Auto Change is set to No When 3D Auto Change is set to YesViewing 3D Images Turn on the 3D Glasses and place them over your eyesPress P/R to select 3D Press O/Q to select On or Off Press 3D MenuPress P/R to select 3D Format, and then press Enter 3D Menu screen is displayed3D Settings 3D Menu 3D Format is set to Auto automatically Frame rate is changed Setting the 3D Format Menu3D Glasses infrared receiver 3D Glasses lensesSpeciﬁcations 3D Glasses Cleaning the projector MaintenanceCleaning the lens Cleaning the exhaust and intake ventsAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Indicators on the ProjectorNot illuminate Down Outlet, and then connect it again Lamp Regarding the LampReplacing the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitResetting the Lamp Timer Hdmi Terminal Connecting Pin AssignmentsComputer Input Component InputComputer control RS-232C Speciﬁcations and CommandsCommands Computer Input Video Input Computer Compatibility ChartDTV Problem Check TroubleshootingReplace the lamp 3D images are not Switch to 3D mode For Sharp Assistance Hdmi SpeciﬁcationsUnits inches mm DimensionsIndex Page Sharp Corporation

Related manuals

Manual 81 pages 27.87 Kb