Sharp XV-Z17000 operation manual 3D Settings 3D Menu

3D Settings (“3D MENU”)

The illustration shown here is for explanation and may be different from the actual on-screen display.

		3D MENU
3D			On
3D	Format		Auto
3D	Depth Adjust
			0
IR Emitter Level
			Normal
3D Auto Change
			Yes
Viewing Time Info
			Yes
Invert

3D

You can switch between 2D and 3D mode.

Selectable items	Description
On	Projects 3D images.
Off	Projects 2D images instead of 3D
	images.

Note

•When “3D Auto Change” is set to “Yes” and a 3D signal is detected, “3D” switches to “On”.

•When a 3D identification signal is not detected:

-If you selected “On”, select the format with “3D Format”.

-If you select “Off”, the video source will be displayed with no conversion.

3D Format

You can set the 3D format manually for when a 3D signal that cannot be detected automatically is received.

Selectable items	Description
Auto	When a 3D identifi cation signal is
	detected, the format is selected
	automatically.
Side By Side	Select the same format type of the
	received 3D signal.
Top And Bottom

Note

•Refer to “Setting the 3D Format Menu” on page 56 for supported signals and 3D formats.

3D Depth Adjust

You can adjust the stereoscopic effect of 3D image.

Selectable items	Description
\ button	For less stereoscopic effect.
button	For greater stereoscopic effect.

Note

•Use this function to get more comfortable 3D images.

•When you use this function, the 3D image will look different from its original 3D appearance. Keep this in mind while using this function.

•The use of this function for commercial pur- poses/public displays in a café, hotel, etc., may be an infringement of copyright protected by law for copyright holders. Please use cau- tion.

IR Emitter Level

You can change the infrared emitter level.

Selectable items	Description
Normal	Normal infrared emitter level
High	Select “High” when it is diffi cult for
	3D Glasses to properly receive the
	infrared signal refl ected off the screen
	due to the use of a large screen and
	viewers being positioned away from
	the screen.

Note

•When “High” is set, other nearby devices that receive infrared signals, such as remote control units of audio-video equipment and air condi- tioners, may not operate properly.

3D Auto Change

This setting can be used to switch to 3D mode automati- cally when a 3D identification signal is detected.

Selectable items	Description
Yes	When a 3D signal is detected, 3D
	mode is selected automatically.
No	Auto change is not performed.	Useful
Viewing Time Info
		Features
This displays the elapsed time of 3D image viewing.
Selectable items	Description
Yes	Displays the elapsed viewing time on
	the screen every hour.
No	Does not display the elapsed viewing
	time.

Invert

Pressing ENTER switches between the image for the left eye and the image for the right eye, so that you can make the settings for more natural viewing.

-55