Sharp DM-4501 System settings Interface settings, Hexadecimal dump mode, Timeout, Port switching

Page 108

KEY OPERATOR PROGRAMS

System settings (Interface settings)

These programs are used to set monitoring and restriction of data transmitted to the parallel port or network port of this printer.

In “Interface Settings”, the following programs can be set.

●Hexadecimal dump mode

●PDL for parallel port {Parallel port emulation switching}

●PDL for network port {Network port emulation switching}

●I/O timeout

●Port switching

Hexadecimal dump mode

This program is used to output the print data from a computer in the hexadecimal dump format with corresponding characters (ASCII). This program is used to check proper transmission of print data from the computer to the printer.

Output example of hexadecimal dump mode (A4 portrait)

PDL for network port {Network port emulation switching}

This program is used to specify a printer language to emulate for printing when the printer is connected to a computer through a network port.

The setting items are the same as those of "PDL for parallel port".

NOTE

It is recommended to set "AUTO" (default setting) unless an error due to this setting occurs frequently.

I/O timeout

This program is used to cancel temporarily port connection or start next job when a preset time elapses to wait until print data is transmitted at the current port. Use this program to set the time from the state to wait for print data reception to the timeout state.

NOTE

The allowable range of the time is 1 to 999 seconds.

PDL for parallel port {Parallel port emulation switching}

This program is used to specify a printer language to emulate for printing when the printer is connected to a computer through a parallel port.

Setting items

Description

Auto

The printer language will switch

 

automatically in accordance with

 

the data from the computer.

 

 

PostScript

PostScript emulation is used to

 

print the data from the computer.

 

(An optional PS3 expansion kit is

 

needed.)

 

 

PCL

PCL emulation is used to print the

 

data from the computer.

 

 

NOTE

It is recommended to set "AUTO" (default setting) unless an error due to this setting occurs frequently.

Port switching

This program is used to set the switching method of the parallel port and network port of this printer.

Setting item

Description

PER JOB

After a print job is complete,

{SWITCH AT

automatic port selection state will

END OF JOB}

be restored.

 

 

TIMEOUT

After I/O timeout time (set with

{SWITCH AFTER

the program above) elapses,

I/O TIMEOUT}

automatic port selection state will

 

be restored.

 

 

DISABLE

Printing from the parallel port is

PARALLEL PORT

disabled.

 

 

DISABLE

Printing from the network port is

NETWORK PORT

disabled.

 

 

6-12

Page 107 Page 109
Image 108
Page 107 Page 109
Contents Laser Printer Page Installation Requirements Battery Disposal Safety Precautions Class Laser Product Laser Klasse Facsimile Feature Fax power switchLine connection Contents Chapter Troubleshooting Maintenance Page Before Using the Product ChapterIntroduction Introduction Scanner module/DSPFDuplex module Punch module Main Features Part Names and Functions ExteriorPart Names and Functions InteriorPart names and functions of peripheral units Upper exit tray extension FinisherMail-bin stacker Stand/MPD & 2000 sheet paper drawerOther peripheral units Operation panel Job status screen To cancel the current print job and delete the print data Mode select keys and indicators Print key/READY indicator/DATA indicatorImage Send key/LINE indicator/DATA indicator Copy key Custom Settings keyPrint mode screen Display switching keysTouch panel Job status screen See next Print hold job listMode switching key Job listPaper Empty in the job status display Print JOB keyUsing the touch panel How to use the touch panel Copier feature Facsimile featureExample Tone ExampleLoading Paper Loading paper in paper trayChanging the paper size in paper tray Loading Paper Paper available in paper traysPaper available in the bypass tray/multi purpose drawer Paper that can be usedMethod of setting paper size and type Press the Custom Settings key Press the Tray Settings keySelect the paper tray for which setting is To be made Touch the OK key to complete the settingSpecifications How to change the paper sizeSetting envelopes or postcards Loading paper in the multi purpose drawerLoading paper in the stand/3 x 500 sheet paper drawer Upper paper trayMiddle and lower paper trays Loading paper in the stand/MPD & 2000 sheet paper drawer Upper paper trayPull out the large capacity tray Gently push the large capacity paper tray Into the printerAdding Toner Storage of SuppliesProper storage Page Printing from a Computer Connecting to a Computer Using this machine as a local printerUsing this machine as a network printer Software for WindowsUninstalling Printer Utilities Click the Start buttonBefore installation On the Start menu, select Settings Then PrintersClick the Have Disk button Computer type Operating systemSetting the Printer Driver Right-click the installed printer driver Select PropertiesWindows 95 / 98 / Me Set each itemEnvironment required for accessing Web pages Accessing Web pages and displaying helpClick the Help button under the menu Frame Close the helpRemote Operation Through Network Items and outline of menu frame of Web pagesSet up Password Normal printHold before print Enter the fifth digit of the password Press the OK key Use the same procedure as to enterPrinting method of hold job list Press the Menu keyEnter the password Ensure that the desired number of copies Is setOperation is now complete Printer account control Printer Basic Settings Making Configuration Setting Making Configuration Setting To finish the setting operation, touch Exit keyTouch the key of the desired item to display Main program settings PCL settingsPostScript settings Custom Settings Press the Menu key to display Custom settings menu screenCustom Settings Press the Custom Settings key whenIts setting screen Setting items Page Troubleshooting and Maintenance When using the operation panel on the main unit General misfeed removal procedureMisfeed Removal Press the Information key to close Misfeed removal guidanceWhen using the operation panel with touch panel Misfeed removal guidanceMisfeed in the paper feed area Misfeed in paper trayMisfeed in the multi purpose drawer Misfeed in the stand/MPD & 2000 sheet paper drawerMisfeed in the stand/3 x 500 sheet paper Drawer Misfeed in the transport area, fusing area, and exit area Misfeed in the duplex module Misfeed in the bypass trayTroubleshooting Problem SolutionTroubleshooting Troubleshooting Supplementary explanation for printing User Maintenance Cleaning the scanner modulePeripheral Units Duplex Module Part namesDuplex Module Open the bypass traySet the type of the loaded paper Loading paper in the bypass tray is now CompleteSetting the printer driver in accordance with your purpose Setting copy functions in accordance with your purposeTroubleshooting concerning the duplex module SeeMAIL-BIN Stacker Setting in the printer driver Using the mail-bin stackerMAIL-BIN Stacker Specifying a mail binMisfeed in the mail-bin stacker Open the top coverClose the paper guide Finisher SuppliesSort mode Group mode Offset modeStaple sort mode FinisherUsing the finisher functions Using the stapling function from the printer featureUsing the finisher functions in the copy mode Staple cartridge replacement and staple jam removal Open the front cover Turn the staple unit to face upBox Remove the empty staple cartridgeFinisher Misfeed in the finisher Remove the misfed paper from the stapler CompilerOpen the paper guide and remove Misfed paper Close the finisher Remove the misfed paperTroubleshooting concerning the finisher Not operateStapling position quick reference list Specifications Saddle Stitch FinisherPart names Saddle stitch finisher functions Saddle Stitch FinisherStaple sort mode Using the saddle stitch finisher functions Using the finisher functions in the copy modeStaple cartridge replacement and staple jam removal Staple cartridge replacementInsert a new staple cartridge into the staple 6box 8Insert the staple box 10Close the front cover9Push back the stapler section 1Open the front coverPunch scrap disposal 9Remove the staple box11Return the lever to its original position 12Insert the staple boxMisfeed in the saddle stitch finisher Pull the knob and slide the saddle stitch5Remove the misfed paper Below11Remove the misfed paper Turn roller rotating knob D in the direction 12of the arrowTurn roller rotating knob D in the direction 13of the arrow Troubleshooting concerning the saddle stitch finisher Stapling position quick reference list BindingRelation between print image and saddle stitch KEY Operator Programs KEY Operator Programs Key operator proguram listUsing the key operator programs KEY Operator ProgramsBACK/C Restore Configuration Use the numeric keys to enter the five-digit 3password 5Press the Custom Settings key6Press the Custom Settings key 2Touch the KEY Operator Programs keyDescription of setting programs Energy save Auto power shut-off timer Auto power shut-offPreheat mode Toner save Toner save in printer modeOperation panel settings Auto clear setting Beep settingLanguage setting Disabling of job priority operationDevice settings Disable duplex unitDisable stapler unit Disable paper desk drawersSystem settings default settings Disable notice page printingDisable test page printing Print density levelSystem settings Interface settings Hexadecimal dump modePDL for network port Network port emulation switching TimeoutSystem settings network settings Reset the NICIP address setting EnableTCP/IPSystem settings initialize/store settings Restore factory defaultsStore current configuration Restore configurationAppendix Printer Specifications CPUList of principal printer functions List of Combination of Peripheral Units Disabling notice page and separator sheet printing Print Area Case of portrait orientation in mm

DM-3551, AR-P450, DM-4500, DM-3501, AR-P350 specifications

The Sharp DM-4551, DM-4501, DM-3500, AR-P350, and DM-3501 are versatile multifunctional copiers that cater to the diverse needs of modern offices. Each model boasts a unique set of features and technologies aimed at enhancing productivity and efficiency in document management.

The Sharp DM-4551 stands out with its advanced printing capabilities, delivering high-quality output at speeds of up to 45 pages per minute. This model is equipped with a user-friendly touch screen interface, allowing for easy navigation and operation. Additionally, it supports duplex printing, reducing paper consumption and promoting sustainability in the workplace. The DM-4551 also features robust security options, such as data encryption and secure printing, ensuring that sensitive documents remain confidential.

The DM-4501, while slightly less advanced, still offers impressive features suited for busy environments. It has similar printing speeds and capabilities as its predecessor but focuses on streamlining workflows. The device's customizable workflows and automated features help users manage large volumes of documents efficiently. With network scanning options, the DM-4501 allows users to convert physical documents into digital formats quickly, facilitating easier information sharing and archiving.

For smaller offices, the Sharp DM-3500 provides a compact solution without sacrificing functionality. This model offers color printing, copying, and scanning. Its straightforward operations and compact design make it an ideal choice for teams looking for an all-in-one device that fits limited spaces. The DM-3500 also includes energy-saving modes and low power consumption, making it an environmentally friendly choice.

The AR-P350 is an impressive addition to the lineup, primarily focusing on high-performance printing. This model features advanced print technologies such as Sharp’s proprietary Microfine Toner, which ensures crisp and clear text and graphics. The AR-P350 is excellent for businesses that require large-volume printing, as it is designed for reliability and durability in demanding settings.

Lastly, the DM-3501 combines the features of its lower-tier counterparts with enhanced capabilities for larger workgroups. This model incorporates advanced connectivity, including mobile printing options, ensuring users can print from various devices seamlessly. The DM-3501 also focuses on providing comprehensive document management solutions, making it suitable for organizations that prioritize workflow optimization.

In summary, the Sharp DM-4551, DM-4501, DM-3500, AR-P350, and DM-3501 showcase the company's commitment to delivering multifunctional devices equipped with advanced technologies designed to enhance productivity, streamline processes, and maintain the security of important documents. Whether for large corporate settings or smaller offices, these models offer an array of features to accommodate various business needs.
Top Page Image Contents