Sharp AR-P350, DM-4551 System settings initialize/store settings, Restore factory defaults

Page 110

KEY OPERATOR PROGRAMS

System settings (initialize/store settings)

The settings of the configuration settings (page xx) and the system settings of the key operator programs (pages xx to xx) can be reset to the factory default settings. Also the current settings can be stored to the memory and the stored settings can be recalled from the memory after the settings have been changed.

In “Initialize/Store Settings”, the following programs can be set.

●Restore factory defaults

●Store current configuration

●Restore configuration

*1 Restore factory defaults

This program is used to reset the settings of the configuration settings (page xx) and the system settings (default settings/interface settings) of the key operator programs (pages xx to xx) to the factory default settings. If you wish to record the settings before resetting, use "List Print" of custom settings to print the settings before using this program.

NOTE

After this program is set, exit the key operator program, turn off the main switch, and then turn on the main switch again after a while. The program will be effective at this time.

*1 Store current configuration

Use this program to store the current settings of the configuration settings (page xx) and the system settings (default settings/interface settings) of the key operator programs (pages xx to xx) in the printer's nonvolatile memory.To recall the stored settings, use the program "Restore configuration" below.

*1 Restore configuration

Use this program to recall the configuration settings that have been stored in the printer's nonvolatile memory using the program "Store current configuration" above.

NOTE

If this program is executed when the setting of "Enable TCP/IP", "Enable NetWare", "Enable EtherTalk" or "Enable NetBEUI" has been changed, exit the key operator program, turn off the main switch, and then turn on the main switch again after a while. The program will be effective at this time.

NOTE

For programs marked with *1, a confirmation message for execution will appear at the end of operation procedure. When the operation panel on the main unit is used, execution of the program can be canceled by pressing the [BACK/C] key.

When the operation panel with touch panel is used, execution of the program can be canceled by touching the [CANCEL] or [NO] key.

System settings (product key)

Use these programs to perform product key (password) input operation in the following cases.

●To use this product as a PostScript compatible printer

The password to be entered is described in the operation manual supplied with the optional PS3 expansion kit.

●To use the network scanner feature (only if the operation panel with touch panel is used)

The password to be entered is described in the operation manual supplied with the network scanner expansion kit (peripheral unit).

6-14

Page 109 Page 111
Image 110
Page 109 Page 111
Contents Laser Printer Page Installation Requirements Battery Disposal Safety Precautions Class Laser Product Laser Klasse Line connection Facsimile FeatureFax power switch Contents Chapter Troubleshooting Maintenance Page Before Using the Product ChapterIntroduction Duplex module IntroductionScanner module/DSPF Punch module Main Features Part Names and Functions ExteriorPart Names and Functions InteriorPart names and functions of peripheral units Mail-bin stacker Upper exit tray extensionFinisher Stand/MPD & 2000 sheet paper drawerOther peripheral units Operation panel Job status screen To cancel the current print job and delete the print data Image Send key/LINE indicator/DATA indicator Copy key Mode select keys and indicatorsPrint key/READY indicator/DATA indicator Custom Settings keyTouch panel Print mode screenDisplay switching keys Job status screen See next Print hold job listPaper Empty in the job status display Mode switching keyJob list Print JOB keyExample Using the touch panel How to use the touch panelCopier feature Facsimile feature Tone ExampleChanging the paper size in paper tray Loading PaperLoading paper in paper tray Paper available in the bypass tray/multi purpose drawer Loading PaperPaper available in paper trays Paper that can be usedMethod of setting paper size and type Select the paper tray for which setting is To be made Press the Custom Settings keyPress the Tray Settings key Touch the OK key to complete the settingSetting envelopes or postcards SpecificationsHow to change the paper size Loading paper in the multi purpose drawerMiddle and lower paper trays Loading paper in the stand/3 x 500 sheet paper drawerUpper paper tray Pull out the large capacity tray Loading paper in the stand/MPD & 2000 sheet paper drawerUpper paper tray Gently push the large capacity paper tray Into the printerProper storage Adding TonerStorage of Supplies Page Printing from a Computer Using this machine as a network printer Connecting to a ComputerUsing this machine as a local printer Software for WindowsUninstalling Printer Utilities Click the Start buttonClick the Have Disk button Before installationOn the Start menu, select Settings Then Printers Computer type Operating systemWindows 95 / 98 / Me Setting the Printer DriverRight-click the installed printer driver Select Properties Set each itemClick the Help button under the menu Frame Environment required for accessing Web pagesAccessing Web pages and displaying help Close the helpRemote Operation Through Network Items and outline of menu frame of Web pagesSet up Hold before print PasswordNormal print Printing method of hold job list Enter the fifth digit of the password Press the OK keyUse the same procedure as to enter Press the Menu keyOperation is now complete Enter the passwordEnsure that the desired number of copies Is set Printer account control Printer Basic Settings Making Configuration Setting Touch the key of the desired item to display Making Configuration SettingTo finish the setting operation, touch Exit key PostScript settings Main program settingsPCL settings Custom Settings Press the Menu key to display Custom settings menu screenIts setting screen Custom SettingsPress the Custom Settings key when Setting items Page Troubleshooting and Maintenance Misfeed Removal When using the operation panel on the main unitGeneral misfeed removal procedure Press the Information key to close Misfeed removal guidanceWhen using the operation panel with touch panel Misfeed removal guidanceMisfeed in the paper feed area Misfeed in paper trayMisfeed in the stand/3 x 500 sheet paper Drawer Misfeed in the multi purpose drawerMisfeed in the stand/MPD & 2000 sheet paper drawer Misfeed in the transport area, fusing area, and exit area Misfeed in the duplex module Misfeed in the bypass trayTroubleshooting Problem SolutionTroubleshooting Troubleshooting Supplementary explanation for printing User Maintenance Cleaning the scanner modulePeripheral Units Duplex Module Part namesSet the type of the loaded paper Duplex ModuleOpen the bypass tray Loading paper in the bypass tray is now CompleteSetting the printer driver in accordance with your purpose Setting copy functions in accordance with your purposeTroubleshooting concerning the duplex module SeeMAIL-BIN Stacker MAIL-BIN Stacker Setting in the printer driverUsing the mail-bin stacker Specifying a mail binClose the paper guide Misfeed in the mail-bin stackerOpen the top cover Finisher SuppliesStaple sort mode Sort mode Group modeOffset mode FinisherUsing the finisher functions in the copy mode Using the finisher functionsUsing the stapling function from the printer feature Box Staple cartridge replacement and staple jam removalOpen the front cover Turn the staple unit to face up Remove the empty staple cartridgeFinisher Open the paper guide and remove Misfed paper Misfeed in the finisherRemove the misfed paper from the stapler Compiler Close the finisher Remove the misfed paperTroubleshooting concerning the finisher Not operateStapling position quick reference list Part names SpecificationsSaddle Stitch Finisher Saddle stitch finisher functions Saddle Stitch FinisherStaple sort mode Using the saddle stitch finisher functions Using the finisher functions in the copy modeInsert a new staple cartridge into the staple 6box Staple cartridge replacement and staple jam removalStaple cartridge replacement 9Push back the stapler section 8Insert the staple box10Close the front cover 1Open the front cover11Return the lever to its original position Punch scrap disposal9Remove the staple box 12Insert the staple box5Remove the misfed paper Misfeed in the saddle stitch finisherPull the knob and slide the saddle stitch BelowTurn roller rotating knob D in the direction 13of the arrow 11Remove the misfed paperTurn roller rotating knob D in the direction 12of the arrow Troubleshooting concerning the saddle stitch finisher Stapling position quick reference list BindingRelation between print image and saddle stitch KEY Operator Programs KEY Operator Programs Key operator proguram listUsing the key operator programs KEY Operator ProgramsBACK/C Restore Configuration 6Press the Custom Settings key Use the numeric keys to enter the five-digit 3password5Press the Custom Settings key 2Touch the KEY Operator Programs keyDescription of setting programs Preheat mode Energy save Auto power shut-off timerAuto power shut-off Toner save Toner save in printer modeLanguage setting Operation panel settings Auto clear settingBeep setting Disabling of job priority operationDisable stapler unit Device settingsDisable duplex unit Disable paper desk drawersDisable test page printing System settings default settingsDisable notice page printing Print density levelPDL for network port Network port emulation switching System settings Interface settingsHexadecimal dump mode TimeoutIP address setting System settings network settingsReset the NIC EnableTCP/IPStore current configuration System settings initialize/store settingsRestore factory defaults Restore configurationAppendix Printer Specifications CPUList of principal printer functions List of Combination of Peripheral Units Disabling notice page and separator sheet printing Print Area Case of portrait orientation in mm

DM-3551, AR-P450, DM-4500, DM-3501, AR-P350 specifications

The Sharp DM-4551, DM-4501, DM-3500, AR-P350, and DM-3501 are versatile multifunctional copiers that cater to the diverse needs of modern offices. Each model boasts a unique set of features and technologies aimed at enhancing productivity and efficiency in document management.

The Sharp DM-4551 stands out with its advanced printing capabilities, delivering high-quality output at speeds of up to 45 pages per minute. This model is equipped with a user-friendly touch screen interface, allowing for easy navigation and operation. Additionally, it supports duplex printing, reducing paper consumption and promoting sustainability in the workplace. The DM-4551 also features robust security options, such as data encryption and secure printing, ensuring that sensitive documents remain confidential.

The DM-4501, while slightly less advanced, still offers impressive features suited for busy environments. It has similar printing speeds and capabilities as its predecessor but focuses on streamlining workflows. The device's customizable workflows and automated features help users manage large volumes of documents efficiently. With network scanning options, the DM-4501 allows users to convert physical documents into digital formats quickly, facilitating easier information sharing and archiving.

For smaller offices, the Sharp DM-3500 provides a compact solution without sacrificing functionality. This model offers color printing, copying, and scanning. Its straightforward operations and compact design make it an ideal choice for teams looking for an all-in-one device that fits limited spaces. The DM-3500 also includes energy-saving modes and low power consumption, making it an environmentally friendly choice.

The AR-P350 is an impressive addition to the lineup, primarily focusing on high-performance printing. This model features advanced print technologies such as Sharp’s proprietary Microfine Toner, which ensures crisp and clear text and graphics. The AR-P350 is excellent for businesses that require large-volume printing, as it is designed for reliability and durability in demanding settings.

Lastly, the DM-3501 combines the features of its lower-tier counterparts with enhanced capabilities for larger workgroups. This model incorporates advanced connectivity, including mobile printing options, ensuring users can print from various devices seamlessly. The DM-3501 also focuses on providing comprehensive document management solutions, making it suitable for organizations that prioritize workflow optimization.

In summary, the Sharp DM-4551, DM-4501, DM-3500, AR-P350, and DM-3501 showcase the company's commitment to delivering multifunctional devices equipped with advanced technologies designed to enhance productivity, streamline processes, and maintain the security of important documents. Whether for large corporate settings or smaller offices, these models offer an array of features to accommodate various business needs.
Top Page Image Contents