Sharp AL-840 operation manual Next button. Proceed to step

INSTALLING THE PRINTER DRIVER SOFTWARE

7	Windows driver file search will find the device “SHARP AL-800 Series”. Click the
	Next button. Proceed to step 9.
	Insert the installation CD-ROM into the CD-ROM drive. Click the Start button and
8
	select Run. When the window shown below appears, type R:\SETUP (if the CD-
	ROM is designated as drive R) and click the OK button. Proceed to step 9.

1

Getting Started

9	The installation program will start. To select a different folder, select Browse and type
	in the path and folder name where the printer driver will be installed. Click OK and
	say YES to create the folder, select the Next button to continue. To install the printer
	driver to the default folder, click the Next button.
	On the display, you will see “printer port to be used”. Normally, this is LPT1 and it is
10
	selected automatically. Ensure that Yes is checked to use the printer as the default
	printer. Finally click the Next button.

11

12

A “Confirm installation” window will be displayed. To continue installation, click the Yes button.

When the installation is complete, you will be asked whether or not to print a test page. If you wish to do so, click the Yes button. At this time, ensure that paper is loaded in the paper tray.

13	If the test print completes successfully, click the Finish button. “The installation of the
	SHARP AL-800 Series Software is complete.” window will be displayed. Click the OK
	button.
	If you have any problem with the test print, see TROUBLESHOOTING on
	page 18.

8