Sharp AL-840 operation manual Message Solution See

Page 22

3

Printer trouble?

STATUS MONITOR

Warning Messages

Message

Solution

See

page:

 

 

TD Cartridge is near Empty.

Running out of toner. While printing can

Copier*1

Reorder a new cartridge and

continue, the print quality will be affected.

 

replace soon.

Reorder a new TD cartridge and replace it.

 

 

 

 

Drum Cartridge is near End of

The drum cartridge is nearly spent. While

Copier*1

Life. Reorder a new cartridge

printing can continue, the print quality will be

 

and replace soon.

affected. Reorder a new cartridge and replace

 

 

it soon.

 

 

 

 

Current job requires manual

Remove the paper from the paper tray. Feed

feeding.

paper one sheet at a time in accordance with

 

Special papers such as

the message on the computer.

 

transparency film, envelope, and

 

 

labels must be fed one sheet at a

 

 

time.

 

 

 

 

 

*1: See the section on SUPPLY PART NUMBERS AND STORAGE.

Fault Messages

Message

Solution

See

page:

 

 

Drum Cartridge is at End of Life.

The drum cartridge is spent. Printing cannot

Copier*2

Replace empty Drum Cartridge

continue until you replace the spent drum

 

with a new cartridge.

cartridge with a new cartridge.

 

 

 

 

Close Front Cover

The front cover on the printer is open.

 

Printing cannot continue until you close the

 

 

cover.

 

 

 

 

Insert TD Cartridge into the

The TD cartridge is not in the printer. Insert a

Copier*3

machine

TD cartridge into the printer.

 

 

 

 

Paper Jam

A piece of paper has misfed within the printer.

Copier*4

 

Printing cannot continue until the misfed

 

 

paper is removed.

 

 

 

 

If the printer does not print, check

Ensure that the power switch is turned on

the power switch and cable

and the printer cable is securely connected. If

 

connection.

another computer is printing on your printer,

 

If a second computer is attached

close this dialog box and restart printing from

 

and printing, close this dialog box

your application after the current job is

 

and reprint from your application

finished.

 

after the other job is finished.

 

 

 

 

 

20

Image 22
Contents AL-840 Page Contents Conventions used in this manual Getting StartedIntroduction Trademark acknowledgmentsWindows 95/Windows 98/Windows NT Main FeaturesMaking floppy disks from CD-ROM WindowsDescription of the printer driver Installing the Printer Driver SoftwareInstalling the printer driver Checking the hardware and software requirementsWindows 95/Windows NT To step Click the Next button Next button. Proceed to step Turn on the printer and then start Windows on your computer AL-800 Series printer driver group DOS Emulation Help DOS Emulation SetupUninstall AL-800 Series ReadmePrinting a PrintingExecuting printing Ready indicator Setting Print Conditions from Printer DriverIndicators on the operation panel On Line indicatorSetting Print Conditions from Printer Driver Paper/Output Image QualityTricks DOS Emulation Print setting from the MS-DOS promptPrinting from AN MS-DOS Application AboutManager Settings on the front panelSoftware printer setting HP LaserJet Series II PCL4Problem Possible cause Solution See TroubleshootingPrinting problems Printer TROUBLE?Normal Messages See the section on Connecting the Interface CableStatus Monitor Message DescriptionMessage Solution See Using Other Installed Drivers Select AL-800 Series, and then click the Connect button Uninstalling Printer Driver AL-800 Series , and Uninstall AL-800 SeriesSpecifications AppendixPin configuration ConnectorParallel Interface 600 dpi Print Area300 dpi Specifications IndexPage Sharp Corporation
Related manuals
Manual 31 pages 21.49 Kb