Sharp AL-840 operation manual Windows 95/Windows NT

INSTALLING THE PRINTER DRIVER SOFTWARE

Windows 95/Windows NT 4.0:

1	Load paper into the paper tray of the printer. For loading of paper, see the section on
	LOADING COPY PAPER in the copier operation manual.
	Turn on the printer.
2
	Turn on your computer and start Windows.
3
	Before installing the printer driver, be sure to close all other applications which
	may be open.
	When using Windows 95 on a personal computer with plug & play*, the “Update
4
	Device Driver Wizard” window will appear. Insert the installation CD-ROM into the
	CD-ROM drive. Click the Next button and follow the on-screen instructions. Proceed
	to step 7. If the “Copying Files” window appears during this operation, enter R:\ (if the
	CD-ROM is designated as drive R) and click the OK button.

●If you use Windows 95 and the “New Hardware Found” window will appear, click the Driver from Disk Provided by Hardware Manufacturer button and then click OK. Proceed to step 6.

●If you use Windows 95 and the screen shown above or the “New Hardware Found” window does not appear, proceed to step 5.

●If you use Windows NT 4.0, proceed to step 5.

★Plug & play

This feature is effective if both the computer and peripheral equipment are equipped with IEEE 1284 compliant parallel interface.

The screen displayed depends on the version of Windows.

1

Getting Started

5