Sharp AJ-1800, AJ-2000 manual Properly align the tab when inserting

Page 38

 

Changing Ink Tank (part 2)

 

Maintenance

 

 

 

 

3

Unpack the ink tank from its protective wrapping

4

Turn the ink upside down, and then immediately

and slowly remove the tape.

insert it to the print head of corresponding number.

Example for the yellow ink tank

!Hold the tank upright when removing the tape. Do not touch the uncovered opening on the ink tank, as ink will get on your hands.

!Ensure that there are no pieces of tape remaining on the ink tank.

Do not touch this area. The printer may not print if it is dirty.

Match the ink tank number to the print head number.

Make sure that each tab securely fixes the ink tank by pressing here.

Properly align the tab when inserting.

Example for the yellow ink tank

 

 

 

 

 

 

 

 

 

 

36

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How to Use the

 

Printer Properties

 

Print

 

Print Status

Sharing Printer

Maintenance

Troubleshooting

 

Online Manual

 

 

 

Window

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 38
Contents Page Contents How to Print Out the Online Manual How to Use the Online ManualHow to Control the Online Manual How to Use the Online ManualOutline of the Printer Driver What is the Printer Driver?Items shown below can be setup on each tab Printer PropertiesStarting the Printer Driver using the Start Button Starting the Printer Driver partStarting the Printer Driver through an Application Printer Driver Functions Apply buttonMain Tab Settings part Collate OrientationPortrait Reverse OrderUp Printing Original SizePaper Tab Settings part Use this screen to select the paper size, tray and zoomBypass Paper SizeTray Custom Paper Zoom%Printable area Guaranteed area and printable areaQuality guaranteed area Advanced Tab Settings part Media Type QualityPrint Quality Output Quality Settings ICMWatermark Tab Settings part Use this screen to set watermarksWatermark Version Tab Settings About buttonPrinting Overview PrintReference Paper Tab Settings Basic Printing partPrinting starts according to your preferences How to Print a Watermark Printing a WatermarkEnlarge/Reduce the Printed Image Automatic Zooming to the Loaded PaperPrinting Multiple Pages on One Printing a Photograph Starting the Print Status Window What is the Print Status Window?Outline of the Print Status Window Print Status WindowPrint Status Window Functions Functions of the print status window are shown belowUnderstanding Error Messages Understanding the Status and Program IconMaintenance Tab Remaining ink indicator windowDisplay print status window when printing Options TabSharing the Printer using Windows Networking Sharing PrinterShared Printer Settings Button Client SettingsInput your options, and click the OK button Maintenance Time to Change the Ink TankChanging Ink Tank part Open the front cover Remove the old ink tankProperly align the tab when inserting Confirm the ink lamp is not blinking Change the print head Test Print HeadClick the OK button Cleaning the Print Head Changing the Print Head part Open the front cover Raise the print head latchLower the print head latch Lift it straight up to removeRemovecase. the new print head from its protective Head, always align the print head Close the front coverTo maintain print quality after changing the print Make sure that the test page was printed clearlyAligning the Print Head part Select a pattern sample for Pattern aPrint head will align itself Click the OK button in the Align print headDialog box Keeping the Printer Clean Identifying Printer Problems TroubleshootingTroubleshooting Is the loaded paper too thick or too thin? Paper is not Fed into the Printer partCHECK1 Is there too much paper in the paper tray? Trouble feeding stiff envelope or heavyPaper tray? Is the printer on a flat surface?Is the paper curled or folded? Press the paper button Paper JamClose the jam cover, insert the output tray Make sure the paper lamp is not blinkingIf all the lamps keep blinking CHECK1 Is the power cord connected?Printer Inoperative Nothing Prints part CHECK10 Has the printer driver been installed properly? ReferenceUninstalling the Printer DriverTroubleshooting Faint, Uneven or Smeared Print Output CHECK2 Is the orientation of document setting correct? CHECK4 Is the paper loaded correctly?Specify the print quality setting in the printer driver Align the print headUnit does not Print in Color CHECK1 Is the printer driver set to the color print option?It is recommended to reduce the size of the file by Printing is too SlowIs your hard disk fragmented? Index ICM