Sharp AJ-1800, AJ-2000 manual CHECK4 Is the paper loaded correctly?

Page 58

Characters or Graphics are not Printed in Correct Position

Troubleshooting

If a document is printed skewed or partly off the paper, follow the steps listed below.

CHECK1 Is the paper size loaded in the tray the same as that specified in the printer driver?

Click the "Paper" tab in the properties dialog box, and check if the "Paper Size" options suit the size of the paper loaded in the tray. If the "Fit To Page" setting is activated, make sure that the paper size selected from the drop-down list of the "Print xxx on:" option is the same to the size of the loaded paper.

Example "Print Letter on:" Index card 5" x 8"

CHECK4 Is the paper loaded correctly?

If a document is physically damaged as it is output or the image is skewed on the paper discard the jammed sheet, reinsert the paper supply and print again. Insert the paper so that there is no visible space between the paper and the paper guides.

Reference:See "LOADING PAPER" in the Setup Guide and Operation Manual for more details on inserting paper.

CHECK2 Is the orientation of document setting correct?

Click the "Main" tab in the properties dialog box, and verify if the "Orientation" option is set to your requirements.

CHECK3 Did you correctly select the desired value for "N-Up Printing"?

Confirm the selected value for "Original Size" when "2-Up" or "4-Up" has been selected for "N-Up Printing". If you have selected a smaller paper size than the document size of your application, the image outside the printable area is not printed.

CHECK5 Did you correctly specify the margins for the application in use?

Check the layout of the document margins and the paper size settings for the application you are using. Also check if the print settings are specified correctly to suit the paper size.

Reference:Quality guaranteed area

 

 

 

 

 

 

 

 

 

 

56

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How to Use the

 

Printer Properties

 

Print

 

Print Status

Sharing Printer

Maintenance

Troubleshooting

 

Online Manual

 

 

 

Window

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Page Contents How to Print Out the Online Manual How to Use the Online ManualHow to Control the Online Manual How to Use the Online ManualOutline of the Printer Driver What is the Printer Driver?Items shown below can be setup on each tab Printer PropertiesStarting the Printer Driver using the Start Button Starting the Printer Driver partStarting the Printer Driver through an Application Printer Driver Functions Apply buttonMain Tab Settings part Collate OrientationPortrait Reverse OrderUp Printing Original SizePaper Tab Settings part Use this screen to select the paper size, tray and zoomTray Paper SizeBypass Custom Paper Zoom%Quality guaranteed area Guaranteed area and printable areaPrintable area Advanced Tab Settings part Print Quality QualityMedia Type Output Quality Settings ICMWatermark Tab Settings part Use this screen to set watermarksWatermark Version Tab Settings About buttonPrinting Overview PrintReference Paper Tab Settings Basic Printing partPrinting starts according to your preferences How to Print a Watermark Printing a WatermarkEnlarge/Reduce the Printed Image Automatic Zooming to the Loaded PaperPrinting Multiple Pages on One Printing a Photograph Starting the Print Status Window What is the Print Status Window?Outline of the Print Status Window Print Status WindowPrint Status Window Functions Functions of the print status window are shown belowUnderstanding Error Messages Understanding the Status and Program IconMaintenance Tab Remaining ink indicator windowDisplay print status window when printing Options TabSharing the Printer using Windows Networking Sharing PrinterShared Printer Settings Input your options, and click the OK button Client SettingsButton Maintenance Time to Change the Ink TankChanging Ink Tank part Open the front cover Remove the old ink tankProperly align the tab when inserting Confirm the ink lamp is not blinking Click the OK button Test Print HeadChange the print head Cleaning the Print Head Changing the Print Head part Open the front cover Raise the print head latchRemovecase. the new print head from its protective Lift it straight up to removeLower the print head latch Head, always align the print head Close the front coverTo maintain print quality after changing the print Make sure that the test page was printed clearlyAligning the Print Head part Select a pattern sample for Pattern aDialog box Click the OK button in the Align print headPrint head will align itself Keeping the Printer Clean Identifying Printer Problems TroubleshootingTroubleshooting Is the loaded paper too thick or too thin? Paper is not Fed into the Printer partCHECK1 Is there too much paper in the paper tray? Trouble feeding stiff envelope or heavyIs the paper curled or folded? Is the printer on a flat surface?Paper tray? Press the paper button Paper JamClose the jam cover, insert the output tray Make sure the paper lamp is not blinkingPrinter Inoperative CHECK1 Is the power cord connected?If all the lamps keep blinking Nothing Prints part CHECK10 Has the printer driver been installed properly? ReferenceUninstalling the Printer DriverTroubleshooting Faint, Uneven or Smeared Print Output CHECK2 Is the orientation of document setting correct? CHECK4 Is the paper loaded correctly?Specify the print quality setting in the printer driver Align the print headUnit does not Print in Color CHECK1 Is the printer driver set to the color print option?Is your hard disk fragmented? Printing is too SlowIt is recommended to reduce the size of the file by Index ICM
Top Page Image Contents