Sharp AJ-2000, AJ-1800 manual Aligning the Print Head part, Select a pattern sample for Pattern a

Click the "OK" button.

The "Align print head" dialog box will appear, and a test chart will be printed.

Aligning the Print Head (part 1)

Maintenance

Align the print head after installing or changing the print head, or if printed lines are not straight, or have blank spaces. Follow the steps below to align the print head.

1	Make sure that Letter sized paper is set in the tray.	5	Check the test chart results, and change the
			preferences to the best setting for each pattern.
2	Click the "Advanced" tab in the properties dialog
	box, and then click "Maintenance" button.
3	Click the "Start" button of "Print alignment
	patterns".

4

How to Use the	Printer Properties	Print	Print Status
Online Manual			Window

1 Select a pattern sample for "Pattern A".

Look at the chart A on your test chart. Select the number under the pattern sample, in which is located the closest to the center of the two vertically parallel lines.

Example:

-8+8

-8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8

43

Sharing Printer Maintenance Troubleshooting