Onkyo TX-DS656 instruction manual Specifications, Amplifier Section

Page 52

Specifications

AMPLIFIER SECTION

Continuous Average Power output (FTC)

Front Main L/R channels:

85 watts per channel min. RMS at 8 ohms, both channels driven from 20Hz to 20kHz with no more than 0.08% total harmonic distortion.

Center channel:

85 watts min. RMS at 8 ohms, driven from 20Hz to 20kHz with no more than 0.08% total harmonic distortion.

Surround L/R channels:

85 watts per channel min. RMS at 8 ohms, both channels driven from 20Hz to 20kHz with no more than 0.08% total harmonic distortion.

Front Remote L/R channels:

85 watts per channel min. RMS at 8 ohms, both channels driven from 20Hz to 20kHz with no more than 0.08% total harmonic distortion.

Continuous Power output (DIN)

Front Main L/R channels: 115W × 2 at 6 ohms

Center channel:

115W at 6 ohms

Surround L/R channels:

115W × 2 at 6 ohms

Front Remote L/R channels:115W × 2 at 6 ohms

Maximum Power output (EIAJ)

Front Main L/R channels: 145W × 2 at 6 ohms

Center channel:145W at 6 ohms

Surround L/R channels: 145W × 2 at 6 ohms

Front Remote L/R channels:145W × 2 at 6 ohms

IM Distortion:

0.08% at rated power (FRONT)

Damping Factor:

60 at 8 ohms (FRONT)

 

Input Sensitivity/Impedance

 

 

PHONO

 

:

2.5 μV, 50 kohms

LINE (CD, TAPE-1, 2, DVD,VIDEO-1, 2, 3)

:

200 μV, 50 kohms

DIGITAL-2, 3 (COAXIAL)

:

0.5 Vp-p, 75 ohms

Output Level and Impedance

 

 

Rec out (TAPE-1, 2,VIDEO-1, 2)

:

200 μV, 2.2 kohms

Pre out (FRONT L/R,CENTER,SURROUND L/R) :

1 V, 560 ohms

(SUBWOOOFER)

:

1 V, 2.2 kohms

Phono Overload:

120 μV RMS at 1,000 Hz, 0.5% THD.

Frequency Response:

20 to 30,000 Hz, +/-1 dB (STEREO)

RIAA Deviation:

20 to 20,000 Hz, +/-0.8 dB

 

Tone Control:

BASS:

+/-10 dB at 50 Hz

 

TREBLE:

+/-10 dB at 10,000 Hz

Signal to Noise Ratio:

PHONO:

80 dB (IHF A, 5 μV input)

 

CD/TAPE:

100 dB (IHF A)

VIDEO SECTION

 

 

 

Television Format:

NTSC (U.S. and Canadian models)

 

NTSC/PAL (Other models)

 

Input Sensitivity/Impedance

DVD, VIDEO-1,2,3 (Composite): 1 Vp-p/75 ohms

S-VIDEO (Y signal):

1 Vp-p/75 ohms

S-VIDEO (C signal):

0.28Vp-p/75 ohms

Output Level/Impedance

VIDEO (VIDEO-1,2,MONI) (Composite):

1 Vp-p/75 ohms

S-VIDEO (Y signal):

1 Vp-p/75 ohms

S-VIDEO (C signal):

0.28 Vp-p/75 ohms

TUNER SECTION

 

 

 

FM:

 

 

 

Tuning Range:

87.5 MHz to 108.0 MHz (50 kHz steps)

Usable Sensitivity:

Mono:

11.2 dBf, 1.0 μV (75 ohms)

 

 

0.9 μV / 75 ohm DIN

 

Stereo:

17.2 dBf, 2.0 μV (75 ohms)

 

 

23 μV / 75 ohm DIN

50dB Quieting Sensitivity: Mono:

17.2 dBf, 2.0 μV (75 ohms)

 

Stereo:

37.2 dBf, 20 μV (75 ohms)

Capture Ratio:

1.5 dB

 

 

Image Rejection Ratio:

U.S. & Canadian models:

40 dB

 

Other area models:

85 dB

IF Rejection Ratio:

90 dB

 

 

Signal-to-Noise Ratio:

Mono:

76 dB

 

 

Stereo:

70 dB

 

Alternate Channel Attenuation: 55 dB, 50 dB (DIN)

 

AM Suppression Ratio:

50 dB

 

 

Total Harmonic Distortion: Mono:

0.15%

 

 

Stereo:

0.25%

 

Frequency Response:

30 - 15,000 Hz +/-1.0 dB

 

Stereo Separation:

45 dB at 1 kHz/30 dB at 100 - 10,000 Hz

Muting Level:

17.2 dBf, 2.0 μV (75 ohms)

AM:

 

 

 

Tuning Range:

European models

 

 

 

522 kHz - 1611 kHz (9 kHz steps)

 

U.S. & Canadian models

 

 

 

530 kHz - 1710 kHz (10 kHz steps)

 

Worldwide model

 

 

 

531 kHz - 1602 kHz (9 kHz steps)

 

 

530 kHz - 1710 kHz (10 kHz steps)

Usable Sensitivity:

30 μV

 

 

Image Rejection Ratio:

40 dB

 

 

IF Rejection Ratio:

40 dB

 

 

Signal-to-Noise Ratio:

40 dB

 

 

Total Harmonic Distortion: 0.7%

 

 

GENERAL

 

 

 

Power Supply:

AC 120 V, 60 Hz

 

 

AC 230 V, 50 Hz

 

 

AC 120 and 220-230 V switchable, 50/60 Hz

Power Consumption:

US and Canadian models: 4.8 A

 

Other area models:

460 W

Dimensions (W × H × D): 435 × 175 × 390 mm

 

 

17-1/8" × 6-7/8" × 15-3/8"

Weight:

12.0 kg (26.5 lbs) (AC 120 V, 60 Hz model)

12.9kg (28.4 lbs) (Other models)

Specifications and features are subject to change without notice.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents TX-DS656 Important Safeguards AvisPrecautions Features Supplied accessories Multi-Room Remote System MRXBefore using this unit Setting the AM tuning step frequency worldwide model onlySetting the voltage selector worldwide model only Installing the batteriesConnecting analog audio source equipment Connecting the antennasConnection Connecting video source equipment Connecting digital audio source equipmentConnecting a decoder with 5.1-channel output Connecting speakersIf you have a 3-head cassette tape deck ConnectionGND terminals Connecting a video camera or TV game machine Video cassette recorder Signal flow To decodersTo receivers Multi Multi-channel outputIf you have a 3-head cassette tape deck Connecting the z remote control cablesIf you have a graphic equalizer TX-DS656 Connecting the antenna cable to the 75/300 ohm Connecting the antenna cableAntenna adapter worldwide models Directional linkageConnecting an FM outdoor antenna Connecting the AM loop antennaConnecting an AM outdoor antenna Connecting the speaker cables Speaker placementRecommendations Connecting a subwoofer Connecting the power Plug the power cord into an AC wall outletCanadian models Other than U.S. or Canadian modelsOn-screen setting If remote control operation is inoperativeSelecting a Menu item On-screen settingPress the Enter button Immediate Display Superimpose ModeCharacter Position Speaker system setup What is System Setup?Speaker Setup Distance settingOn-screen speaker system setup Speaker system setupPress the Power button Press the Enter button Speaker system setup using the front panel Press the Power or System button Press the Parameter buttonSelect YES or no using the Smart Scan Controller Select the distance using the Smart Scan ControllerLevel Calibration using remote controller Press the Power button Press the Test Tone buttonTest tone output stops Test Tone button Level y/u buttonInput source selection and surround setup Using the on-screen MenuPress the Power button Select the desired items using the y or u buttonInput source selection and surround setup To select TAPE-2Using the front panel Press the Power or System buttonInput selector button Selected input source Cassette tape deckFor details, Selecting the digital/analog audio input on ButtonTuner section Using the front panel or the remote controller Press the MULTI-CH Input buttonIf you press the TAPE-2 Monitor button Video source currently set is automatically selected MenuSelecting the digital/analog audio input Press the Enter button to confirm the settingPress the Digital Audio Selector button Useful functions for playback Adjusting the tone Using headphonesUsing the Muting function Changing the brightness of the displayTuning in a broadcasting station Automatically tuning in an FM station Auto tuningIf auto tuning of an FM station is not possible Listening to FM/AM broadcastsRecalling a preset broadcasting station Presetting a stationCanceling a preset station Listening to FM/AM broadcastsUsing the on-screen Menu Press the Enter button Recalling a preset stationInput Selector screen appears Switching between the frequency and name indication Entering a station nameEntering characters Erasing a station nameReceiving RDS broadcasts European models only Receiving RDS broadcasts European models only Searching for traffic information TP scanDisplaying Radio Text RT Refer to the explanation on PTY on the previousDSP Digital Signal Processor Using the Surround modesSurround modes Using the Surround modes Selecting a Surround mode Using the on-screen MenuSurround Mode setting Setting the surround mode parametersChanging the surround mode parameters Using the Cinema Re-Equalization Cinema Re-EQ functionUsing the Midnight Theater function Using the LFE Low Frequency Effects functionAdjusting the Effect and Reverb levels Selecting the Hall sizeSurround modes for music and sports Hall Size Effect Level Reverb LevelUsing the on-screen Menu Recording from a sourceRecording from an audio/video source Output jacks and connectable recording equipmentUsing the front panel Press the REC OUT button REC OUT indicator flashes for 8 secondsRecording from a source Adding sound to video camera imagesUsing the TAPE-2 Monitor function Using a graphic equalizerPlaying equipment connected to the TAPE-2 jacks Press the TAPE-2 Monitor button on the front panelTo erase all the learned commands Learning new control codesConnection diagram Multi-room system connectionsMulti-room system connections Install Remote Sensor HR-10 in the subRoom, then connect it to the TX-DS656 Playing a source in the sub-room Sub-roomTo use the front panel Press the MUTING/REMOTE Speaker buttonMemo Troubleshooting Trouble Cause RemedyTroubleshooting AM antenna connectorsAM stations cannot be received Connect the included AM loop antenna toSpecifications Amplifier SectionControl positions and names Rear panelFront panel Control positions and namesMemory button 33 FM MUTE/MODE button 32, 33 Display Remote controllerDVD player operation buttons Onkyo U.S.A. Corporation D9805-1 E
Top Page Image Contents