Sharp MX-5001N Sending a fax directly from a computer PC-Fax, Machine also has these functions

Sending a large number of pages as a single transmission job (Job Build)

A stack of originals higher than the indicator line on the automatic document feeder cannot be fed through the feeder. The job build function lets you divide the stack of originals into sets, feed each set, and send the sets as a single transmission.

Transmission

Sending a fax directly from a computer (PC-Fax)

A document on a computer can be sent
via the machine as a fax. Select the
PC-Fax driver as the printer driver on your
computer and then select the Print
command in the software application.
Image data for transmission will be	Transmission
created and sent as a fax.
This function can only be used on a
Windows computer.

For more information, see the Help file for the PC-Fax driver.

The machine also has these functions

•Forwarding a received fax to a network address (Inbound Routing Settings)

☞Operation Guide "FAX RECEPTION" in "4. FACSIMILE"

•Sending a fax at a specified time (Timer)

•Storing fax operations (Program)

•Changing the print settings for the transaction report (Transaction Report)

•Temporarily changing the sender information (Own Name Select)

•Transmitting originals of different sizes (Mixed Size Original)

•Faxing thin originals (Slow Scan Mode)

•Checking the number of scanned original sheets before transmission (Original Count)

•Calling a fax machine and initiating fax reception (Polling)

•Sending a fax when another machine polls your machine (Polling Memory)

•Stamping scanned originals (Verification Stamp)

☞Operation Guide "SPECIAL MODES" in "4. FACSIMILE"

•Performing F-code communication

☞Operation Guide "PERFORMING F-CODE COMMUNICATION" in "4. FACSIMILE"

•Connecting and using an existing phone (Extension Phone Connection)

☞Operation Guide "USING AN EXTENSION PHONE" in "4. FACSIMILE"

77