Sharp AL-1610 operation manual Loading Copy Paper

Page 16

Use user program No. 21 to set the selected paper size. See page 32.

7

8

Push the paper tray firmly back into the copier.

● When using 11" x 17" copy paper, store the left guide in the slot at the left front of the paper tray.

5 Load copy paper into the tray.

Place the appropriate label to indicate the selected

6 paper size into the recess on the right front side of the paper tray.

4

Move the left guide to the appropriate slot as marked on the tray.

3

Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper.

2

Push the pressure plate down until it locks in place.

1

Gently lift and pull out the paper tray until it stops.

Changing the copy paper size in the tray

LOADING COPY PAPER

GETTING STARTED

Loading copy paper

Left guide

Front guide

14

Image 16

Contents AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions AUTO/MANUAL/PHOTO / / key and indicators p Alarm indicatorsInterrupt key and indicator p Power Save indicator p6START key and indicator Initial settings2Zoom keys p 3Copy ratio display key pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingInstall the TD cartridge SET-UPTurn the power switch on Load copy paper SET-UPLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper TD Cartridge Replacement Push gently the right side of the front cover to open CoverTD Cartridge Replacement Lift the TD cartridge lock release lever and pull To remove itCartridge out until the green strap handle can be grasped By the right hand. Lift the cartridge by the handle whileDrum Cartridge Replacement Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier Misfeed Removal Misfeed in the paper feed areaTurn the roller rotating knob in the direction ArrowMisfeed in the paper tray Close the side cover by pressing the handle on the coverUser Programs Setting the user programsList of user programs User Programs Preheat mode Power Save ModesAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode User Maintenance Original table and platen coverBypass tray paper feed roller Transfer chargerCharger cleaner out by holding the tab User MaintenanceGently lift and pull out the paper tray and take Problem Solution Copier TROUBLE?Copier TROUBLE? Self-diagnostic functionExample Supplies Types and sizes of copy paperSupply part numbers Supply listSupplies Genuine supplies statementProper storage Store the supplies in a location that isMoving Instructions Turn the power switch off and disconnect the power CordGently lift and pull out the paper tray until it stops Specifications Specifications Index Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable LimitsOther Limits Ingredients CAS No ProportionHealth Hazards None required under normal use Memo Memo For users in the USA Sharp Corporation