Sharp AL-1610 operation manual User Maintenance, Gently lift and pull out the paper tray and take

Page 30

USER MAINTENANCE

1 Turn the power switch off.

Open the bypass tray. Lift slightly on the side cover and

2 slide the cover out until it stops.

	Charger	Gently lift and pull out the paper tray and take the
	Charger	3 charger cleaner out by holding the tab.
	cleaner	3 charger cleaner out by holding the tab.

Set the charger cleaner onto the transfer charger and

4 gently slide the cleaner in the direction indicated by the arrow two or three times.

Slide the charger cleaner from one end to the other end along the groove of the transfer charger. If the cleaner is stopped on the way, smudges on copies may occur.

●If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth.

Return the charger cleaner to its original position. Close

5 the paper tray. Close the side cover by pressing the handle on the cover.

6 Turn the power switch on.

User maintenanceGENERAL INFORMATION

37

Image 30

Contents AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Interrupt key and indicator p AUTO/MANUAL/PHOTO / / key and indicators pAlarm indicators Power Save indicator p2Zoom keys p 6START key and indicatorInitial settings 3Copy ratio display key pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingInstall the TD cartridge SET-UPTurn the power switch on Load copy paper SET-UPLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper TD Cartridge Replacement Push gently the right side of the front cover to open CoverTD Cartridge Replacement Cartridge out until the green strap handle can be grasped Lift the TD cartridge lock release lever and pullTo remove it By the right hand. Lift the cartridge by the handle whileDrum Cartridge Replacement Misfeed Removal Misfeed in the bypass trayMisfeed in the copier Misfeed Removal Misfeed in the paper feed areaTurn the roller rotating knob in the direction ArrowMisfeed in the paper tray Close the side cover by pressing the handle on the coverSetting the user programs User ProgramsList of user programs User Programs Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Bypass tray paper feed roller User MaintenanceOriginal table and platen cover Transfer chargerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the paper tray and take Problem Solution Copier TROUBLE?Self-diagnostic function Copier TROUBLE?Example Supply part numbers SuppliesTypes and sizes of copy paper Supply listProper storage SuppliesGenuine supplies statement Store the supplies in a location that isTurn the power switch off and disconnect the power Cord Moving InstructionsGently lift and pull out the paper tray until it stops Specifications Specifications Index Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Memo Memo For users in the USA Sharp Corporation