Sharp AL-1610 operation manual TD Cartridge Replacement

Page 18

TD CARTRIDGE REPLACEMENT

Remove the protective cover from the TD cartridge by

5 unlatching three cover hooks from the holes on the cartridge and then pulling the cover in the direction indicated by the arrow in the illustration.

Gently insert the TD cartridge along the guides until it

6 locks in place.

If dirt or dust is adhered to the TD cartridge, remove it before installing the cartridge.

Close the front cover by pushing both sides with your

7 hands and then close the side cover by pressing the

handle on the cover. The indicator will go out .

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

STATUS INDICATORS TD cartridge replacement

25

Image 18

Contents AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Interrupt key and indicator p AUTO/MANUAL/PHOTO / / key and indicators pAlarm indicators Power Save indicator p2Zoom keys p 6START key and indicatorInitial settings 3Copy ratio display key pCopier Installation Do not install your copier in areas that areGetting Started Checking Packed Components and Accessories UnpackingInstall the TD cartridge SET-UPTurn the power switch on Load copy paper SET-UPLoading Copy Paper Push the paper tray firmly back into the copierLoading Copy Paper TD Cartridge Replacement Push gently the right side of the front cover to open CoverTD Cartridge Replacement Cartridge out until the green strap handle can be grasped Lift the TD cartridge lock release lever and pullTo remove it By the right hand. Lift the cartridge by the handle whileDrum Cartridge Replacement Misfeed Removal Misfeed in the bypass trayMisfeed in the copier Misfeed Removal Misfeed in the paper feed areaTurn the roller rotating knob in the direction ArrowMisfeed in the paper tray Close the side cover by pressing the handle on the coverSetting the user programs User ProgramsList of user programs User Programs Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Bypass tray paper feed roller User MaintenanceOriginal table and platen cover Transfer chargerUser Maintenance Charger cleaner out by holding the tabGently lift and pull out the paper tray and take Problem Solution Copier TROUBLE?Self-diagnostic function Copier TROUBLE?Example Supply part numbers SuppliesTypes and sizes of copy paper Supply listProper storage SuppliesGenuine supplies statement Store the supplies in a location that isTurn the power switch off and disconnect the power Cord Moving InstructionsGently lift and pull out the paper tray until it stops Specifications Specifications Index Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsIngredients CAS No Proportion Other LimitsHealth Hazards None required under normal use Memo Memo For users in the USA Sharp Corporation