Sharp TINSZ2600RCZZ instruction manual Cor c, Entry digit limit for r, R and t, 018 @

Entry digit limit for r, R and t

Entry digit limit @r, Ror tA (only for manual entry)

•For rR, enter 0 to 9 (digits), and for t(manual tax), enter 0 to 7 (digits). By default, 9 for rand R and 7 for tare set.

Entry digit limit is in effect for REG mode operation but can be overridden in MGR mode. The entry digit limit is represented by the number of allowable digits for maximum entry or total amount. When “0” is set, the operation of the corresponding key is prohibited.

Key operation example Print

4@

R A

Function parameters for C, c and A (when using as CA key)

			To program		“0” for all items
					*2
						@	s, Cor c		A
				*1ABC
			To program for another key
								*2:Press skey for CA key setting.
*1:Item:								Selection:		Entry:
	A	Footer printing						Allow		1
								Disallow*		0
	B	Amount tendered entry						Compulsory		1
								Non-compulsory (for the CA or CHK keys)*		0
								Inhibit (for the CH key)*		0
	C	Entry digit limit							0-8 (default: 8)

Footer printing

•This option decides whether or not the machine should print a message at the bottom of a receipt when a specified media key is used. To program a footer logo message, refer to “Logo messages” section on page 43.

Amount tendered entry

•You may select amount tendered, compulsory or optional, for the Aand Ckeys.

•You may select amount tendered, compulsory or inhibited, for the ckey.

Entry digit limit

•For the cand Ckeys, program upper limit entry amount for the tendered amount. For the Akey, program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is represented by the number of allowable digits for the maximum entry or total amount. When “0” is set, the operation of the corresponding key is prohibited.

Key operation example

018 @

C A

Print

ABC (A:0, B:1, C:8)

38