Sharp 240T Use this button to optimize image quality automatically, Coarse, and Image Position

body2.fm Page 10 Monday, September 18, 2000 8:53 AM

Adjusting Your LCD Monitor

Function	Description
AUTO	n Use this button to optimize image quality automatically.
	n “Auto adjustment” feature affects following parameters: Fine,
	Coarse, and Image Position.
EXIT	n Exits from menus and sub-menus.
	n Exits from the OSD system.
	n Turns the PIP off.
–/+	n Use this button to change “Brightness.”
	n When OSD is active, use “–” and “+” buttons to navigate through
	menus.

MENU

nUse this button to bring “OSD” menu.

POWER

nUse this button to turn ON or OFF the monitor.

Direct-Access Features

Brightness

- + 25

Follow these instructions to adjust the brightness.

1	With the menu off, push the “–” or “+” button
	to display the brightness adjustment menu.

2	Push the “+” button to increase the
	brightness; push the “–” button to decrease

the brightness.

OSD Lock/Unlock

This function allows you to secure the current settings so that they cannot be inadvertently changed, while still allowing you to adjust the Brightness and Contrast.

You can unlock the OSD controls at any time by using the same procedure.

With the OSD screen off, push and hold the Menu button for at least 5 seconds to lock or unlock the controls. When locked, a 'LOCKED!' message will be displayed along the bottom of each OSD menu except for these screens :

•Brightness

•Contrast

English 10