body2.fm Page 21 Monday, September 18, 2000 8:53 AM
Appendix
Troubleshooting
If you have a problem setting up or using your LCD monitor, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem.
Table 3. Troubleshooting – Image
What you see... | Suggested Actions | Reference |
|
|
|
Screen is blank and | n Ensure that the power cord is | Connecting your LCD |
power indicator is off | firmly connected and the LCD | monitor, page 5. |
| monitor is on. |
|
|
|
|
“ Check Signal Cable” | n Ensure that the signal cable is | Connecting your LCD |
message | firmly connected to the PC or | monitor, page 5. |
| video sources. |
|
| n Ensure that the PC or video |
|
| sources are turned on. |
|
|
|
|
“Sync. Out of Range” | n Check the maximum resolution | Display Modes, page 25. |
message | and the frequency of the video |
|
| adaptor. |
|
| n Compare these values with the |
|
| data in the Display Modes |
|
| Timing Chart. |
|
|
|
|
The image is too light | n Adjust the Brightness and | Brightness, page 12. |
or too dark | Contrast. | Contrast, page 12. |
|
|
|
Horizontal bars appear | n Adjust the Fine function. | Image Lock, Fine, |
to flicker, jitter or |
| page 12. |
shimmer on the image |
|
|
|
|
|
Vertical bars appear to | n Adjust the Coarse function and | Image Lock, Coarse, |
flicker, jitter or | then adjust the Fine function. | page 12. |
shimmer on the image. |
| Image Lock, Fine, page 12. |
|
|
|
English 21
Portuguese Italiano Español Deutsch Français English