Sharp 210T, 240T manual Position, Color control

body2.fm Page 13 Monday, September 18, 2000 8:53 AM

Adjusting Your LCD Monitor

Table 1. Screen controls (Continued )

Icon		Menus and		Function Descriptions
		Sub-menus	–	+
	n Fine		Although "Auto Adjustment" automatically finds the
	n Coarse		optimum values of FINE and COARSE parameters as well
			as IMAGE POSITION, it may be necessary for you to
			adjust those parameters manually. It is recommended for
			you to use "Auto Adjustment" first. If the adjustment
			results are not satisfactory, then use COARSE and FINE
			adjustment features to get the best adjustment results.
			Bear in mind that COARSE and FINE adjustments may
			change the width of the image and affect IMAGE
			POSITION as well. If the image is clear while out of
			center by a couple of pixels, use IMAGE POSITION to
			center the image.
	H-Position		n Changes the location of the image.
			n In case of the image is off center, use this function to
			center the image.
	V-Position		n H-Position
			“–” : Move to the LEFT
			“+” : Move to the RIGHT
			n V-Position
			“–” : Move to the Bottom
			“+” : Move to the Top
	Color control		The tone of color can be changed from bluish white to re-
			dish white. The individual color components are also user
			customizable.
	n Mode 1		Redish white.
	n Mode 2		Plain white.
	n Mode 3		Bluish white.
	n User Mode		User customizable.
	n Reset		Color parameters are replaced with the factory default
			values.
			English	13

Portuguese Italiano Español Deutsch Français English